PN | Tube Dia. | Price | Buy |
---|---|---|---|
MS21919-WCJ2 | 1/8" | $3.55 | |
MS21919-WCJ3 | 3/16" | $3.85 | |
MS21919-WCJ4 | 1/4" | $4.35 | |
MS21919-WCJ5 | 5/16" | $3.99 | |
MS21919-WCJ6 | 3/8" | $3.85 | |
MS21919-WCJ7 | 7/16" | $3.75 | |
MS21919-WCJ8 | 1/2" | $3.40 | |
MS21919-WCJ9 | 9/16" | $5.35 | |
MS21919-WCJ10 | 5/8" | $5.35 | |
MS21919-WCJ12 | 3/4" | $8.65 | |
MS21919-WCJ14 | 7/8" | $9.50 | |
MS21919-WCJ16 | 1" | $8.50 | |
MS21919-WCJ20 | 1-1/4" | $10.50 |
Band Material: Corrosion Resistant Steel Cushion Material: Fluorosilicone - For elevated temperature usage in petroleum based fluid contaminated areas. Unaffected by ozone. Not resistant to phosphate ester based fluids. Color is solid blue. |
They are blue. Looks good on the firewall
Clamp 1/2 MS21919-WcJ8
It is good
Clamp 1/4 MS21919-WcJ4
Clamp 3/4 MS21919-WcJ12
Haven’t installed yet
Clamp 1-1/4 MS21919-WcJ20
Haven’t installed
Clamp 1 Dia MS21919-WcJ16
High Quality stainless clamp, liner will withstand engine compartment heat
High quality, stainless clamp recommended for higher temps and worth the price
High Quality Adel type clamp with Fuel resistant material. Wish it was also available in larger diameters, I used Adel clamps to mount my boost Pump and Filter that required -26 and -30 sizes.
Great for clamping wires on engine mount. Easy to install, rust free.
These work well to clamp onto a Vans RV engine mount when securing wires firewall forward.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The band is made from 321 corrosion resistant steel. The diameter where the stud would go through is .199" to .209".