Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Alcor By Tempest EGT / TIT Type K Thermocouple Clamp 3-3/8 Max
MFR Model# 86255
Overview
|
ALCOR CLAMP 3-1/4 EGT/TIT PROBE
GROUNDED, .80 OHM, TYPE K *All ring terminals and hardware. |
Features
- Backed by an industry leading 5 year warranty
- Small element diameter provides for near instantaneous instrument response
- Provides sufficient electrical power for Alcor unamplified instruments
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type K EGT or TIT instruments and leads
- Clamp fits 1 1/8" to 3 1/4" diameter exhaust systems with approximately .1285" size hole
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
Specifications
- Type: K - Red and Yellow
- Grounded
- Style: Clamp 3 ¼” Max
- Resistance: .80 ± .10 Ohm
- Weight: 0.12 lbs
- Alcor P/N: 86255
Reviews
This item was shipped to me quickly. I appreciate the detailed product description when ordering. This is a perfect fit for my airplane.
Verified Purchase
86255 Alcor EGT Probe Type K
Exact fit. Easy to install.Kit comes with new tiny screw and nut set insulatoe sleeve and zip ties.
Verified Purchase
86255 Alcor EGT Probe Type K
Whats alive again!
Verified Purchase
86255 Alcor EGT Probe Type K
Aircraft Spruce is the best at expediting shipping and delivery
Verified Purchase
86255 Alcor EGT Probe Type K
I had a failure of my Cylinder #1 EGT Temperature probe recently, I ordered this new one. It took about 2 hours to install properly, and it worked fine on the test flight. In fact, I discovered that this version of the EGT probe is actually built much better than the original was (it seats much better into the exhaust manifold). The electrical parts were of sufficient length for Cylinder #1, but might not have been for others. The wiring was compatible with my current wiring.
Verified Purchase
86255 Alcor EGT Probe Type K
Worked great after install.
Verified Purchase
86255 Alcor EGT Probe Type K
OEM probe fits and works perfectly. Nothing better than “plug and play”.
Verified Purchase
86255 Alcor EGT Probe Type K
Perfect fit and replacement. All you need yo replace this item included.
Verified Purchase
86255 Alcor EGT Probe Type K
Excellent machine work, great piece of equipment.
Verified Purchase
86255 Alcor EGT Probe Type K
best and most reliable probe doesnt fail at the ferrule like other products I have used
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The lead from the probe to the terminals is about 12 inches. You can order 42525 which is a 90" extension lead (this is there shortest extension lead).
JPI recommends using their type k thermocouple probes with JPI units.
P/n: 86255 is a grounded probe designed for use with analog indicators, versus p/n: 10-86339 (86317 or 86343) is ungrounded designed to be used with digital indicators.
Yes, the red lead is shorter than the yellow lead.
