PN | Lord # | Price | Buy |
---|---|---|---|
05-00443 | SE-1051-2 Approved Replacement For Cessna # 0442512-1, 0542119-1 | $1433.00 | |
05-00444 | SE1051-3 Approved Replacement for Cessna # 0442512-2, 0542119-2 | $3420.00 | |
05-02610 | SE-1068-5 Approved Replacement for Cessna # 0743624-1 | $1654.00 | |
05-00446 | SE-1069-3 Approved Replacement for Cessna # 0743624-2 | $1458.00 | |
05-03382 | SE-1070-7 Approved Replacement for Cessna # 2643090-3 | $4836.00 | |
05-04185 | SE-1090-1 Approved Replacement for Cessna # 0842410-2 for selected models, 0001-0710 for 182 Models | $4493.00 | |
05-03421 | SE-1076-1 Replaces Beech #s: 35-825145, 35825145-2, and 35-825145-6 | $2001.00 | |
05-12930 | SE-1508-2 Replaces Piper 456-015 Supercedes SE-1508-1 | $2228.00 |
Note: Please review the application guide to confirm the correct part number for your aircraft. The LORD® Fluid-Free Shimmy Damper offers high-performance damping with a maintenance-free design. It uses surface-effect technology to provide consistent damping for nose gears. Instead of using fluids to resist motion, our Shimmy Damper features a unique rubber formulation with a high-tech lubricant to absorb nose wheel shimmy. Since there is no fluid, this damper will not leak. Accelerated life testing of the LORD Shimmy Damper has demonstrated that it provides targeted damping after over 5,000 ground-air-ground duty cycles. This represents a product life of more than 10 years of usage on a typical high-use aircraft. NOTE: Installation hardware not included |
Lord Shimmy Dampener Se-1051-2
Everything worked as advertised. Came with all the hardware including several different sized washers, but hang on to your old ones as we needed an old worn extra thin one to get the right fit to eliminate slack. Thankfully we didnt need to replace any bushings.
Lord Shimmy Dampener Se-1051-2
Although expensive, definitely removed a bad shimmy on my recently purchased 182.
Cessna Shimmy Dampener SE1068-5
new shimmy dampener and new bushings took all shimmy out of nose wheel.
Cessna Shimmy Dampener SE1068-5
Excellent service product is what explained extremely fast shipping
Lord Shimmy Dampener Se-1051-2
Expensive but should be a permanent. Performs exquisitely. Simple install.
Lord Shimmy Dampener Se-1051-2
Problem solved! Great product
Lord Shimmy Dampener Se-1051-2
Easy install. The bolts and bushings worked great. The pin was short, and had to use the longer one that we had on before because it was in good shape. Feels good on landing.
Cessna Shimmy Dampener SE1068-5
Lord Shimmy Damper SE1076-1
Life changing for a 172. No regrets even at the price
Lord Shimmy Dampener Se-1051-2
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The Lord shimmy damper # SE-1069-3 weighs approximately 1.07 lbs. The other shimmy dampers should be similar in weight.
It is a direct replacement.