Overview

Features

• For best results, apply Flextex VT Low VOC over a primer surfacer sanded with 320 grit. See www.polyvance.com for info sheets and instructional videos on texturing.
• To build texture, apply 3 to 5 light “splatter” coats allowing flash time between coats. Move the gun quickly and don’t flow out the paint. Reduce fluid flow at the gun for light coats. Let dry 30 minutes if light coats are applied and 2 to 3 hours for heavier applications before top coating. For more details on applying Flextex VT, see reverse side for application S.O.P.
• Flextex VT may be top-coated with a lacquer compatible top coat system.
• Clean spray gun immediately after use with lacquer thinner

Texturing Reference

• Use a test panel for determining the textured desired. Painting with limited amounts of reducer and low air pressure at the gun will produce the coarsest texture. For finer textures, reduce the paint with 3804R-4 Flextex VT Low VOC Reducer up to 200%.
• 
  
• Heavy Texture: Spray Flextex VT mixed 8:1 (paint: reducer) using a 1.8 mm spray gun at 25 psi.
• Medium Texture: Spray Flextex VT mixed 3:1 (paint: reducer) using a 1.8 mm spray gun at 25 psi.
• Fine Texture: Spray Flextex VT mixed 1:1 (paint:reducer) using a 1.8 mm spray gun at 25 psi.
• 

Benefits

• Simulates OEM textures
• Only one texture paint needed for all texture sizes
• Compatible with nearly all topcoat systems
• Does not require topcoating if black texture is desired

Documents

• Polyvance Flextex VT Low VOC Reducer Safety Data Sheet
• Polyvance Fletex VT Low VDC Information Sheet with Procedures