Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Birch Plywood 12 X 24 X 1/16
| Size | Degree | No. of Plies | Approx Weight (4 x 8 Sheet) | Part Number |
|---|---|---|---|---|
| 1/16x1x2 | 90° | 3 | 7 lbs | 02-00040 |
Overview
|
American-made structural aircraft-grade plywood is made of American Birch veneers laminated in a hot press to hardwood cores of Poplar or Bass wood with waterproof glue. Will meet all requirements of specification MIL-P-6070, which calls for shear testing after immersion in boiling water for 3 hours. Far superior to many plywoods in which all plies are 1/16 inch thick and laminated in a cold press to make up the total thickness. Tests should be made on cold press plywoods before use on aerobatic aircraft. Available in 45° and 90°
Attention 90° 2' x 4' Plywood are cut with grain. If cross cut required, specify at time of order |
Reviews
High quality multi layer plywood. Exactly what I was looking for.
Verified Purchase
Birch Plywood 12 X 24 X 1/16
Verified Purchase
Birch Plywood 12 X 24 X 1/16
High quality, no blemishes, crated adequately for shipping (almost couldnt find the plywood for the packaging).
Verified Purchase
Birch Plywood 12 X 24 X 1/16
Excellent product, arrived in perfect condition
As described. Packaging was very careful and thorough to avoid damage during shipping. Nice job.
Plywood is very high quality, exactly as described on website. Order was easy to place, arrived in a reasonable length of time, given the holidays and other complications caused by the C/V. Also arrived in perfect condition. Am more than pleased with this order.
I used this to make gussets. Good material and the size keeps the shipping down.
Excellent quality wood, well packed came through on time and without damage, thank you , I can now make Flying Flea parts and last the pandemic out...
Good quality, well packed,can now spend my quarantine making wing ribs....thanks Aircraft Spruce....you have saved my sanity....
The birch plywood was for model RC boats . It was nice Quality . Shipped promptly and the packaging was excellent . The wood arrived quickly and with no damage . Glad to have finally found a dependable source !
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This will have 3 plys.
The 1/4" is made with 5 plies.
5 plies.
No, the max for UPS ground is 2x4 cuts.
The 1/8" domestic Birch Plywood is 3 ply material.
That is difficult to answer, it really depends on what your plans call for and what the application is.