These 1 wide rolls of Teflon™ on fiberglass anti-chafe tape are excellent for use on engine cowlings to keep cowl components from chafing. The tape is available in 0.5 mil thick and 1.0 mil thick and comes with a silicone adhesive on the tape. Just peel back liner and install. Rolls are 1" wide x 36 yards long. |
Product works well
.5 Mil Fiberglass Tape With Liner
We installed this tape on the strip where the cowl covers on our R182 ride on the composite nosebowl. We were seeing a lot of streaking indicating that relative motion in flight was scrubbing metal off the cowlings due to rubbing. The tape is pretty thin - did not appear to make the cowl surface higher than the nosebowl. So far it has totally eliminated the smoking we were seeing. We cleaned the surface with acetone and then denatured alcohol prior to applying tape. Its only been a month, but so far the tape adhesion looks good.
Very good chafe tape and affordable too!
We use this tape often to prevent chafing on cowls and flaps. Very durable slick surface. Have never had an issue with adhesion, so long as the surface is cleaned properly.
Great product. I had NO issues with the adhesive, just prep the area with alcohol first and it stick perfectly well. Since the tape is so thin, it doesnt affect the fit of the cowl unlike some other abrasion tapes. Ill definitely be using this from now on for my cowling and would certainly recommend it to others.
Showed promise as a good solution to prevent cowl chaffing. Unfortunately, it has very little adhesion so it falls off almost immediately. Even on the cleanest of surfaces. Very dissappointing.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: No, this is not an FAA Approved tape.
The rolls are 1" width x 36 yard length.
0.02 inches thick.
It is pale yellow/green.
It is either 0.5 mil or 1.0 mil.