Homsley Smoke Oil Injector, sprays oil in a razor thin 180 degree pattern for more smoke using less oil. No welding required. Attaches to exhaust pipe thru a Ľ inch hole and a single hose clamp. Two required for great smoke. |
Most of these smoke oil injector units go into aerobatic performing AC for show purposes. But mine will be installed into the single exhaust pipe on my 1939 Ford 91C half ton pickup, after the V8’s right & left junction and before the electric controlled Y pipe cut out dump valve. The smoke oil liquid tank will in fact be a US Plastics supplied one gallon windshield washer with a small self contained pump that puts out a good solid stream lasting over a minute if running free. But I shall be adding an in line needle valve to control and reduce the flow duration.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
P/N# 05-06918 is priced and sold each. So you will receive one unit when you purchase P/N# 05-06918.
It is outfitted with part # 05-11908, OIL FUEL FLOW RESTRICTOR FITTING.