REAL are twice as thick as typical gaskets and have been hot oil and dry heat tested at 300°F. Only REAL gaskets seal uneven surfaces, eliminate corrosion, and reduce maintenance costs. They may be reused, installed dry, and maintain screw torque. Indefinite shelf life. Highly recommended by Rutan Aircraft Factory. Application: 0-235; 0-290; O,IO (6 Holes),LIO-320; O-340; O-360-A,B,C,D; IO-360-B;HO-360-A,B; HIO-360-B; VO,IVO-360; O-240-A,B,E,F,G; IO-540-C,D,J,N,R FAA-PMA Approved |
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
Great replacement to the traditional cork garkets and hasnt leaked once. Truly recommend.
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
Perfect fit. Far superior to the old cork gasket.
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
Far superior to old fashioned cork gaskets. Perfect fit.
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
These work great! Don’t bother with cork seals, they never hold. Not a drop out of these.
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
No leak gaskets , light torque screws with blue locktight
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
Spendy but they work well, follow install guidelines.
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
Great gasket. I had an oil leak with the old neoprene gasket. My mechanic gave me one of these to try. Awesome product, works well, comes with installation instructions, torque specs, etc. highly recommend!
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
ENCELENT
Real Gasket RG-75906-Sp Lycom Valve Cover Gasket With 6 Holes
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes. Both products are made of the same material and share a similar pattern. It appears that the holes for both gaskets line up.
Yes, 75906 is standard for a Lycoming.