Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Tr-19 Thinner For Akzo Epoxy
MFR Model# FRESH STOCK
- JUMP TO
- Overview
- Documents
- Reviews
- Q&A
- View in Catalog
| Description | PN |
|---|---|
| TR-19 Thinner for Akzo Epoxy | 09-00439 |
Overview
| AKZO interior epoxy primer #463.12-8 is a chemically cured 2-component epoxy primer designed to provide maximum protection from various chemicals, hydraulic fluids, aviation fuels, and corrosive causing media. Drying time to touch is 15 minutes and to recoat is 1-24 hours. Shelf life: 2yrs,Color: Green. Used extensively in military and aerospace applications and popular with aircraft builders. Uses 1 gal. of primer & 1 gal. of catalyst. |
Documents
- Tech Data Sheet (PDF)
Reviews
This stuff is great. It sticks to the surface. Its a hard protective coating. It scotch brites smooth. As long as UPS doesnt damage it coming to your house, you will love this stuff.
Product is amazing. Once cured it cannot be scratched or scraped off. Solvent resistant as I soaked my gun tips in lacquer thinner for a week and still had to scrub off dried primer (my fault as I should have cleaned the gun immediately) Original order damaged my UPS and received an email advising product was thrown away and shipper had been notified. Contacted customer service and Caroline looked up my order and immediately sent a replacement. Excellent customer service after the Sale!
I wouldn’t use anything else. 18 years ago I used this on my RV6 and on the exterior wet sanded with 600 grit and then PPG Concept top coats. That RV still looks great today. Now I’m using on my Xenos project. This is durable stuff.
This stuff is fantastic. I used PREKOTE to treat the surface and then spray the AkzoNobel. Easy to spray and mix. Drys hard as rock. Does not scratch or flake off.
Love this stuff but having to buy a gallon to get a quart is expensive and wasteful. So, I buy 8 quart containers and after thorough mixing of each gallon, I pour the contents into the quart cans and reseal with the hope that I can use it all up before it dries up! I was disappointed that the color was more of an olive drab instead of the bright green in the aerosol can, however.
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this comes with an activator.
You can use MEK for cleaning the gun.
It is not required, but use as needed for the spray equipment, but no more than 25%.
Take a look at our Alumiprep P/N#'s 09-01621 & 09-01620. There are tech data sheets listed on the web pages. This will give you the detailed information you need to prep your aluminum.
We do not have a color chart for this primer. The tech data sheet calls it DN 9295 Green. It is a smooth finish, but looks like a flat milky light green color.
24 month shelf life.
Thinning is not necessary....but if customer wants to thin they can use any epoxy reducer...Thinning beyond .25% not recommended
The data sheet only mentions spraying it as the application process.
