LPS 3 Premier Rust Inhibitor is a specially formulated long-term corrosion inhibitor protecting metal parts in inside storage for up to two years. When applied it forms a soft, transparent, waxy film sealing out moisture, air, acid, alkali fumes, and other corrosive elements. |
Appearance/Physical State: | Cloudy/Liquid |
---|---|
Odor: | Mild. Cherry |
Melting Point/Freezing point: | Not Available |
Boiling Point/Range Aerosol: | Not Available, Bulk: 320°-392°F |
Vapor Pressure Aerosol: | Not Available, Bulk 2.6 mm Hg @20°C |
Partition Coefficient: | Not Available |
Percent Volatile Aerosol: | 63-82 %, Bulk: 78.45% |
Flammability Limit: | Lower 0.6, Upper 6% |
Propellant Aerosol: | Carbon Dioxide, Bulk: N/A |
VOC Content Aerosol: | 62.8%, Bulk: 75.58% |
Color: | Brown |
Flash Point: | Aerosol 64.4°F, Bulk 104.5°F |
Relative Density: | Not Available |
Evaporation Rate: | Aerosol - 151 (Ethyl Ether), Bulk: 0.2 (butyl acetate=1) |
Vapor Density: | Aerosol: Not Available, Bulk 4.8 |
Auto-Ignition Temperature: | 446°F (230°C) |
Viscosity: | Aerosol-Not Available, Bulk: 20-550cP |
Specific Gravity (water=1): | Aerosol: 0.87, Bulk: 0.81 |
Temperature Range °F(°C): | Not Available |
4-Ball Weld Load: | Not Available |
Great stuff usable almost everywhere
LPS 00322 #3 Premier Rust Inhibitor 20 Oz
LPS 00322 #3 Premier Rust Inhibitor 20 Oz
I wanted to ask someone today during the pickup...did not, so I will ask now: I plan to use this for the undercarriage of my SUV. I did a lot of research but just want to know what you think of this. I sometimes power wash the undercarriage (when I think SALT has accumulated) and I wonder what you think about LPS 3 standing up to this...just the ocassional power wash. Or is it better to rinse the undercarriage with a normal hosing?
Easy to apply and dries fast
used this product for the past 30 years. Works great and would highly recommend it to anyone trying to control rust. Super product.
I use as rustproofing car drame ans its the best off the world!
Been using LPS 3 for almost 10 years. Best rust inhibitor money can buy. And best of all, it really does what is says it can do. Stays on and is not washed away by rain or slush.
Love this stuff. Has many uses from cable lube and protect-ant for my outdoor car hoist to clean and lube my motorcycle chain. Evaporates off and leaves a waxy lube protection.
Seems to be a great product. I’m using it as a rustproofing on my new Silverado. Time will tell the longevity but it applies well and has good even coverage. I have since used it in 3 more vehicles. Hopefully it last through one winter.
I use Lps 3 to help prevent corrosion on automotive brake lines. Great product, but difficult to find in local stores.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, it meets MIL-PRF-16173E Grade 2 Class 1. Please see the Approvals tab for additional spec info.
LPS 3 cannot be used in the manner described. It can be applied to a dry, rusted surfaces that has had any loosely adhered corrosion removed. It will not convert the rust but will halt further corrosion from occurring. It cannot be painted over.
I believe it would be safe, but it is brown in color and could stain the paint. I would not recommend it for this application.
This product is a common use product, not aviation specific. It does not have a specific approval application guide. You would need to check your engine manual for storage procedures.
Per the manufacturer: it is possible that LPS 3 could transfer to other substrates and the petroleum components could affect some finishes.
Shelf life is 1825 days.