1-877-795-2278 | info@aircraftspruce.ca
Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278
- Photo may represent series and not specific product
- SHARE
Star Gloss Gray Sealer Gal
$170.99/Gallon
Part# 09-02578
MFR Model# 27-GS4
MFR Model# 27-GS4
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
Gray Sealer is used to seal Ceconite fabric prior to spraying Silver Urethane Fabric Primer. This coat prevents pinholes in the Silver Urethane Fabric Primer. Gray Sealer is also used to apply Ceconite finishing tapes. It is tinted translucent gray to help see it when applied. Coverage:: Approximately 150 square feet per gallon. Mixing: Use a mixing stick to blade up settled product. After hand stirring, shake on a double-action paint shaker for five minutes before use. Always insure that Gray Sealer is mixed into suspension before using. Thinning: Thin three parts Gray Sealer to one part Sealer Reducer. Application: 1.To Seal Fabric: Brush one coat on the fabric surfaces with a quality bristle or nylon brush. Put on sufficient Gray Sealer to wet the fabric with a uniform translucent coating. Runs on the inside surface of the fabric indicate that the fabric is wet on both sides, thus encapsulating the weave. Do not spray; spraying may not wet both sides of the fabric. 2. Applying tapes and fabric gussets: Apply a wet coat of Gray Sealer in the area the tape will lay. Lay the tape into the wetted area and brush with a dry brush to force the Gray Sealer through the weave of the fabric. Dry Time: 20 minutes at 77° F. Shelf Life: Four years in unopened storage. Avoid storage above 100° F. Available in quart, gallon, and 5 gallon sized. |
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
