MFG | Description | PN |
---|---|---|
P-110-R | EGT/TIT Standard 13/64" dia Probe (Robust) | 10-01591 |
P-110 Probes including: Standard & Fast Response with or without 6ft lead - Hose Clamp type
FAST RESPONSE P-110-F - EGT/TIT Probe - Hose Clamp Type, used with .130” hole. Optional with most kits. Weight: 1.3 oz The basic difference between the P-110R (robust) and the P-110F (fast response) is the physical diameter of the probe. The P-110F measures .125" and the P-110R measures .187". The smaller diameter allows for a faster responding signal. Additionally, the depth of the probe can be adjusted with the P-110F as it uses a tapered ferrule to secure the probe. The P-110R uses two clips to secure the probe to the clamp. |
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
The EI P-110 is awesome. Easy to install right out of the package. The provided connector and tool are very user friendly. Recommend replacing as needed.
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
An excellent probe and the new improved connectors are more secure.
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
Worked perfectly, first time!
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
Contrary to the Q&A, the probe/clamp assembly does include a lead approximately 13 long measured from the clamp. It also includes two OLC-2 connectors already attached to the lead, the allen wrench needed to splice it in, and instructions.
Item arrived in good condition with easy to follow instructions. Replacement of the probe solved erroneous reading on my older Electronics International EGT temp monitor. The P-110-R probe had the same dimensions as the old one and extremely fast response rate if you are wondering like I did if you should purchase the fast response probe.
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
As advertised, it works well. One only has to trim the clamp to length prior to installation, which would be the case with any other clamp. This also includes the EI-style barrel clamps (with instructions) if one chooses to use them.
Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
Exactly as described. Arrived within 3 days of order.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The diameter of the P-110 EGT clamp is 3 inches without being tightened.
The Electroinics Internatial P-110 EGT/TIT Probe has two wires (yellow and red) which must be stripped 3/8" for proper overlap to the OLC-1 Overlap connectors which are provided with the probe.
Per EI, the The P-110 EGT/TIT probe is ungrounded.
No, the standard #1 version, part number 10-01591 does not come with any leads attached.
These are Type K ungrounded.
Yes, these EGT probes are compatible with all series EI EGT gauges.
Per the mfg.- there is not specific ohm range for this probe. This probe is a type k thermocouple with a nominal reading of under 10 ohms. If the probe has failed, the ohm reading will show open.
Yes, part # 10-01591 has an option to add the lead. Please contact avionics sales to process the special order.
Yes, these are compatible.
Part # 10-00377 is the probe plus a 6 foot lead.