THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278

Fuel Probe 12V 12In 3Bnd 0-5V

$236.95/Each
Part# 10-03746
MFR Model# FP1212V3

Overview

The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the tubes from touching, acts as a capacitor that has one value in air (empty tank) and changes in value as the fuel level rises inside the probe. The amplifier converts these values to a signal suitable to drive a standard meter or other display device. Can be manually calibrated. See Documents tab.
12-24 Volts
12 or 24 inches with 3 inch bend

Reviews

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does this fuel probe have a standard SAE 5-hold bolt pattern?

Yes this has the 5 hole pattern. We suggest having the product in front of you before making any changes or modifications.

Q: Is the probe sensitive to fuel level if this level is between bend mark circle and the head?

Per the datasheet, the outer tube is simply a ground for the inner tube that does the sensing.

View in Catalog

View Image View in Catalog