Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
JPI Upgrade To EDM 730 Or 830
MFR Model# UPGRADE 730-830
- JUMP TO
- Overview
- Videos
- Reviews
- Q&A
- View in Catalog
Overview
|
Note 1: Core charge will be automatically added to order. Core charge is refunded once valid core is returned to JPI (manufacturer). All cores must be sent direct to JPI. Note 2: EDM 730/830 fits in a 3-1/8" hole and is not a direct slide in for the EMD 700/800 2-1/4" units. This upgrade program will allow you to swap out your 700 to the new 730 or 800 to the new 830 as the new 730 and 830 use a standard 3-1/8" mounting hole. The 730/830 will use the same JPI probes and will better display engine parameters with this plug and play upgrade. |
Videos
Reviews
700 to 730 Upgrade Plug and Play exactly as stated using existing probes and wiring. Great Experience!
I've been flying with the EDM-700 for some time now, it recently quit working so instead of repairing, I decided to go with the upgrade option to the EDM-730. It was so worth the extra time and money. Much more information at a glance, not to mention it was a plug and play upgrade. Very good bang for the buck in my opinion!! Don't hesitate, upgrade.
Absolutely worth the upgrade! I've been flying with EDM-800 for several years and have loved it. Recently a few of the number segments stopped working, but instead of repairing it, I upgraded to EDM-830. Absolutely LOVE it! A lot more info at a glance! Much prettier full color display. If you're thinking about it, then BUY it!
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The EDM 830 is 3.1W x 4.2H x 3.0D (does not include connector and wire) and weighs .95lbs.
The EDM 830 is 3.1W x 4.2H x 3.0D (does not include connector and wire) and weighs .95lbs.
Yes, this is for both sizes of the 700 or the 800 EDM gauges.
The EDM 730 and 830 are secondary engine monitors so you will need to keep your primary engine gauges and probes. The EDM 930 is a primary engine monitor replacement.
No, the upgrade is only for the new display so the options you currently have (4 or 6 cyl) will be displayed. You can add options at any time such as oil temp or oil pressure if you currently do not have those options installed.
The JPI EDM 730 is 3.1"W x 4.2"H x 3.0"D without connectors and wire. Also note that this gauge (3-1/8” mounting hole) can be mounted up, down, right and left. For more information please see our videos tab for the JPI 730.
The depth of the EDM 730 is 3 inches. The depth of the EDM 700 is 8 inches.
No, because you will keep the current probes you have installed the upgrade to part number 10-03864 is the same price for 4 and 6 cylinder models.
Yes, contact sales for a quote.
The 730 is a direct replacement for the 730 as long as you have a JPI harness and probes. The same applies to the 830, however you will have to order and install the extra options that are available with the 830.
