The RAM-B-108BU accommodates rails from 1.0 inch to a maximum of 2.1 inch in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screwdriver until the strap has a firm hold on the rail. |
work very good
RAM Base Ball & Strap 1 - 2
easy to use does the job great thanks
very happy with this it worked better than i had hope for
Second one purchased for Bonanaza/Debonair type aircraft. This is the mount, period. RAM products are exceptional on their own, but this is a solid mount for the specific use and puts what you need in the right place with lots of freedom to move things to suit the pilot flying.
As advertised. I needed this mount to attach my iPad to the yoke in my Comanche. The mount is very adjustable and come with two clamps. There is a black plastic sleeve that is inserted over the metal clamp band. I used some dish soap to make the sleeve slide on easier. Once the clamp was on the yoke I was able to adjust the distance to a perfect fit. If you have a thicker yoke rail this is a good product.
Installed 2 of these on a powered parachute. 1 for GPS and 1 for Icom radio. Worked great.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.