Model # | Description | Part No. |
---|---|---|
WRM-1940 | Bulb, 12VDC (WRM-44KA) | 11-03897 |
Rotating Beacon Replacement- The round mechanical rotating beacon was used on the vertical fin of all Barons from 1961 thru 1969. Models using this light are 95-55 (1961), A55 (1968-1969).
Note: The B55 Baron continued to use this beacon until production stopped in 1982. |
great ! Thanks
Wrm-1940 Whelen Lamp
Perfect
Wrm-1940 Whelen Lamp
Product was rushed out in a timely manner to allow an overnight delivery to keep on flight schedule.
Worked great
Beacon bulb works as advertised and Aircraft Spruce made ordering easy and delivery was 2 days early. Thanks again a pleasure doing business with you.
service and company support was 1st class. But come to find out the bulb and the base was defective. so, I had to order another entire beacon assymbly and I went with the LED setup. Any way I can return the A469B bulb?
Great value
This whelan replacement lexan dome is a perfect replacement for my cracked and hazed rotating beacon dome on the top of my PA 28-140 vertical fin. You will need to re-use the old dome rubber screw seal inserts for the proper install as these are not included with the new dome.
WRM-30 gasket is a perfect fit for sealing the lexan dome.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, there is. To convert to LED from the old Beech Rotating beacon use part number 11-09908 (14V) or 11-07619 (28V).
The height is 2.68 + or - .03". The OD of the base is 4.23".
The outside dimension is 4.23" in diameter.
Yes this will fit WRM-24.