I must have tool for every pilot and aviation mechanic.

Plan B Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

This tool is amazing

Cowell A Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

a fine socket

Michael G Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Worked great, and the magnet held the spark plug in place.

John R Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Great - Better than my old one. Bill

Bill C Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Shiny & round & does the job!

Eric W Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Only spark plug socket that I could find that is thin walled enough to fit the Tempest plug. The magnet is a nice plus too.

Shawn G Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Very good product. I especially like the magnetic feature.

William J Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

I have nothing negative to say about this. It is what it says it is, came in great condition and works very well. Would have no problems reordering again and I do recommend this product.

William C Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Its a sparkplug wrench and it works. Used it with a crescent wrench on a Grumman AA5 without any problems.

Stuart S Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Fits nicely between baffles and sparkplug.

Ettore P Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

The magnet inside at the top of the socket certainly retains the spark plug when lifting from the cylinder. The socket wall is thin enough that the socket facilitates removal of all the plugs from my O-320-D2B.

Bruce B Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Great product. Cradles the plug perfectly to keep from dropping it

Michael B Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Perfect tool for the job.

Emery S Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Great tool for travel toolkits being 3/8 drive instead of 1/2.

Aaron M Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Seemed like a good addition to the toolbox! Wrencheable and has a magnet to hold the plug.

Conway A Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Havent used it yet but looks like good quality.

Joseph J Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Work good

Roger C Verified Purchase

AtS950 3/8 Dr Spark Plug Socket

Excellent delivery time and the product meets my expectations. A level of service way above the competitors.

Good construction, should last, fits the plug well. Plug removal is reliable, magnet feature works to hold onto the plug at removal.

Works as advertised - good quality, nice heft. I use it with my fine wire plugs, no issues at all.

The magnet saves plugs!

This deep socket did the trick when others failed to have enough depth to fit securely. The magnetic qualities were welcome and made the tool feel much more secure when working with the fragile and expensive plugs.

After 25 years of changing Champion plugs with a standard deep well socket, I was surprised when the same didn’t work with Tempest plugs. Their design requires an extra deep well which this socket has. The magnet securely holds the plug while you get it lined up and the thin wall makes it easy to get into tight places. It’s a bit expensive, but worth every penny.

High quality. Expensive for a socket, but the magnet is good and strong. If the magnet keeps me from dropping just one expensive plug, then it pays for itself. I like it so far.

Its a good socket. I wondered if the magnetic feature was going to hold the plugs properly. The magnet seems to do a good job of keeping the plug secure in the socket during removal and installation. Ive payed more for specialty sockets and Ive payed less. So, the price is what it is.

This is a quality thin walled socket for spark plug removal and insertion as the magnetic feature helps guard against accidentally dropping a plug which is important with any plug--especially the expensive fine wire plugs.

Quality appears good. Used to replace six tempest UREM40E plugs and the fit was good. I did like the magnet that holds the plug over rubber method.

Great socket. The magnet is a definite improvement over the old rubber grommet.

Great spark plug socket. Magnetic socket that hold the plug into the socket and the 7/8 end for close tolerance cowls makes it my go to economical spark plug socket

Great socket. Works as advertised!

If you run Tempest plugs in a snugly cowled application, its almost a must. Because the socket also works on Champions you have both lines covered with one tool. When things are tight and there isnt room to get a ratchet or torque wrench in to turn the socket, use a crows foot attachment. The magnetic feature is very valuable, which anyone who has accidentally let a fine-wire plug slip from a socket understands.

Holds the plug great and gets in where you need it..

Works on all the engines I have tried it on. O-235, IO-360, O-470, IO-470, TIO-540, E-225, O-320, etc. Seems well made. Time will tell if it holds up to daily use. I think so. The magnet holds the plugs surprisingly well. Good fit and hold around the spark plugs and fits into cylinder spark plug recess.

Works perfectly. Was surprised to not see a rubber grommet, but was my own fault. I didnt read carefully enough before I purchased to see that it was magnetic. Like the magnetic feature better anyhow. Works great on Tempest REM40Es.

It performs well enough. I prefer my Champion.