These are top quality, new manufactured assemblies. They are designed, manufactured, and proof tested to rigid FAA standards. All seat belts use proven lift to release style Davis metal to metal buckles. Push-to-release buckles are not used due to difficulties in releasing under emergency conditions. Aircraft quality alloys and 2-inch nylon webbing are used throughout. Seatbelts are certified to FAA TSO-C22f. Specially designed for the VariEze, this popular combination is also used in the Long-EZ, Quickie, Q2, Cozy, Sea Hawk and several other homebuilts. The belts are made to fit snugly, and the aluminum end fittings save weight. Order two sets for all above aircraft except Quickie which uses one set. Not FAA approved for certificated aircraft. |
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Here is the dimensional info we have available for 13-01300. Shoulder harness dimensions (both sides): from fixed side 15-1/2" then 13" from adjuster. Slack of 20". Total length 35-1/2". Lap Dimensions: Both sides adjustable, both 18", total length 36". Belt Width: 2".
The hardware on this style no. 5 belt and harness set is silver.
No, style No. 5 belt / harness sets come in black only.
The 13-01300 requires a 1/4" bolt to mount to the airframe.
One set weighs approximately 1.68 lbs.