It showed up in 10 day exactly as advertised. Swapped out the adapter with no issues and used it to annual our 912. It works great!

Best company, fast shipping and excellent tool. Recommend

Bought for use on Rotax, so the first thing I did was to attempt to remove the 18 mm spark plug adapter that comes pre-installed on the flex hose. The soft brass nut on the flex hose immediately rounded off as it was so tight. CPS sent another complete tester, and I very carefully used vice grips to hold the brass nut while removing the 18 mm adapter, to find that the threads had been cemented together (presumably to eliminate leakage) by a hard-setting cement. Spent the next hour carefully removing the cement from the brass threads on the end of the flex hose, then a couple of minutes filing the sharp edges cut into the flats with the vice grip. The next job will be to try to make a leak-proof connection, using Teflon plumbers tape, between the flex hose and the 12 mm spark plug adapter, which is a machined section of bar stock with no flats to accept a wrench and will therefore need a padded pair of pliers to hold it tight enough to apply enough torque to tighten without crushing it. They really should charge a few bucks more and supply two separate hoses, with spark plug adapters pre-installed, one 12 mm and the other 18 mm. I have no idea how well it works yet as a tester as I did not have a spare month to wait around with my airplane out of service. I let CPS know exactly what the problem was, sending them a photo of the offending part, and they sent a new kit without question or delay. I was surprised to then receive a letter from the post office expressing regret that my package had been damaged during shipment and to please retain the damaged packaging while they investigate.

DIFFERENTIAL COMPRESSION TESTER W/ 12MM & 18MM ADAPTERS//Part #: 15-05209: Received email asking to review this product. Process to do so IS NOT user friendly and after some time of trying to figure it out, I clicked SUBMIT and received a message saying it was unable to find the page. After several attempts to do so, I gave up and decided to address this issue via the CONTACT US page. Review is as follows: Received in timely manner. Compression hose defective out of box/leaked air at fitting junction. Had to repair hose in order to use product and check compression. Quality of product was/is definitely sub-standard which is very disappointing coming from a company I believed I could always count on for excellent product quality and integrity.

This was on backorder for over 6 months, unacceptable.