12mm Adapter for Cylinder Pressure Tester. |
I have not tried it yet. Added the air hose connector and inspected it finding no issues.
12MM Adapt Indust.Equiv/Eastrn
Perfect !
Just finished making a 12mm whip hose for my old Moroso 89600 Leak Down Tester will be Honda CBX testing shortly. Added a plug gasket in addition to the o-ring, as the o-ring got fouled by the head threads the first time I test fitted things will see if that works better.
Be forewarned that this adapter will not be easy to install. Since Aircraft Spruce was out of the E2A-12mm differential pressure testers, I bought the standard E-2A tester and this 12mm adapter. The fitting on the E2a was on so tight that wrenches could not remove it. I ended up having to cut the E2Aa fitting off. The 12mm adapter now fits, but if, when I use my E2A and it ends up being defective, I am afraid I will not be able to return it due to the damage caused. Whoever puts on the fittings at Eastern Technology is using TOO MUCH thread locker and TOO MUCH torque!!
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, this replaces the 18mm tip. You have to remove the 18mm from the whip hose and install this to use it in a 12mm hole.
The female thread is 1/4 NPT. It is the standard thread for air compressor fittings.