Varglas Non-Fray Sleeving is flexible, high-temperature secondary insulation made from closely braided, continuous filament fiberglass which has been heat-cleaned to remove impurities in the yarn and to retard fraying. Type HO: Heat cleaned and treated with an acrylic resin binder (natural or pigmented). Binders are applied to further retard fraying and to hold sleeving round for cutting. HO may be less vivid after exposure to 150°C. Will serve as secondary insulation unaffected indefinitely through a temperature range from -60°C to 316°C and withstand up to 616°C for shorter periods. Since there is no impregnant that will provide dielectric protection at those extremes, these sleevings require heavy or multiple-wall thicknesses if used as primary insulation. |
it actually frays a tiny bit, but not too bad. I used it for a sleeve to protect the CHT wire in the engine bay
Tanis Sleeving Varglas Non-Fray Ho #3 Red - Foot TA3120003-R
Very easy to use for wire protection and provides a more pleasing appearance.
Tanis Sleeving Varglas Non-Fray Ho #3 Red - Foot TA3120003-R
Used it to protect some aircraft wiring on a pizza grill. Worked great.
Tanis Sleeving Varglas Non-Fray Ho #5 Red TA3120005-R
Does what ir says, need larger diameters
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
#3 is 0.249/0.229 | #5 is 0.198/0.182 | #6 is 0.178/0.162