Used on wing to fuselage fairing on my RV-6A.
Just right
David C
Verified Purchase
Rubber Channel
August 20, 2024
RUBBER U CHANNEL
Part# 05-02200
MFR Model# TA277
The u shape channel is soft and very pliable. Easy to open channel up and fit to the edge of the sheet metal. Was able to fit in very tight openings. Would recommend gluing channel to surface for secure figment.
Michael C
Verified Purchase
Rubber U Channel
June 18, 2024
Great product used for edge on 16 ga aluminum
David B
Verified Purchase
Rubber Channel & Molding
September 23, 2023
I should add that return of 01400 was very expeditious. and well handled. Order of replacement very well handled. I am very satisfied!
George H
Verified Purchase
Rubber Channel & Molding
July 27, 2023
Good quality
Paul B
Verified Purchase
Rubber Channel
April 20, 2023
Economical, exactly as ordered
Michael F
Verified Purchase
Rubber Channel & Molding
April 18, 2023
fit great and looks great
Darwin D
Verified Purchase
Rubber Channel & Molding
April 4, 2023
John I
Verified Purchase
Rubber Channel & Molding
February 10, 2023
John I
Verified Purchase
Rubber U Channel
February 10, 2023
works well for the job we used it on
Jordan R
Verified Purchase
U Channel 1/8
August 9, 2022
Id give it 5 stars. Good product.
Patrick M
Verified Purchase
Rubber Channel
July 27, 2022
Skyking A
Verified Purchase
Rubber Channel & Molding
July 26, 2022
Havent used but did a test fit and will work with my intentions
Tim O
Verified Purchase
Rubber U Channel
July 5, 2022
For some reason , it is hard to get this product at other plac
James J
Verified Purchase
Rubber Channel & Molding
June 5, 2022
Exactly what I needed. Pliable yet strong.
General A
Verified Purchase
Rubber Channel & Molding
May 20, 2022
prompt reliable response
Marion A
Verified Purchase
Rubber Channel & Molding
March 24, 2022
This rubber channel was the EXACT cross section needed to nicely finish the leading-edge wing cuffs on my homebuilt. A small bead of weatherstripping adhesive in the groove, and it stays put without pulling loose.
Dennis K
Verified Purchase
Rubber Channel
January 27, 2022
We replaced the rubber around the bottom of the vertical stabilizer on the 182A. Ordered 12 ft and we had about a foot left over. Looks great and was delivered quickly!
Robert S
Verified Purchase
Rubber U Channel
December 27, 2021
A pleasure to fit. Used it on the gap wing to fuselage fairing on my Starduster Too. Looks great
Warnervale A
Verified Purchase
Rubber Channel & Molding
December 14, 2021
Turboplus A
Verified Purchase
Rubber Channel & Molding
October 29, 2021
The rubber channel was exactly what I expected. I have not installed y
Tom S
Verified Purchase
Rubber Channel & Molding
October 16, 2021
Exactly as ordered and promptly delivered. One cant ask for more!
Andrew S
Verified Purchase
3/16 U-Channel
August 31, 2021
This U channel was a perfect replacement. Good communication and prompt delivery by this vendor.
Joseph E
Verified Purchase
U Channel 1/8
August 24, 2021
Great product, fit perfectly. Fast shipping, arrived very quickly after order.
Robert S
Verified Purchase
Rubber Channel & Molding
July 15, 2021
Product quality was good but the order took more than a month to be sent to me, and the product was in stock. And Im still waiting, more than 6 weeks later, for the remainder of the order that was not in stock. Good quality yes, but Ill try some place else if I want something here in a reasonable time.
Wayne D
Verified Purchase
Rubber Channel & Molding
July 2, 2021
Product quality was good but the order took more than a month to be sent to me, and the product was in stock. And Im still waiting, more than 6 weeks later, for the remainder of the order that was not in stock. Good quality yes, but Ill try some place else if I want something here in a reasonable time.
Wayne D
Verified Purchase
Rubber Channel & Molding
July 2, 2021
Just what I was looking for
Paul C
Verified Purchase
Rubber U Channel
June 16, 2021
Very easy to install and great price.
Geoffrey K
Verified Purchase
3/16 U-Channel
May 28, 2021
Fine quality product,will keep on buying.
Eusebio
May 21, 2021
Exactly what I needed and very fast shipping. Thanks!
Bill
March 30, 2021
Great product and fit exactly at the edges of vertical fin with the tail on Beechcraft C23
Phillips I
March 16, 2021
Perfect score on availability, service, price, and delivery time.
Paul E
February 3, 2021
very fast
Gerald C
October 21, 2020
Easy purchase and payment, fast shipment, and a quality product. Ive purchased before and will purchase again when needed.
Craig
September 24, 2020
These edge moldings and weather stripping are excellent quality and I was able to buy just the length I needed for my application. Because of the reasonable price and custom lengths I was able to buy a range of sizes to try for the perfect fit. Purchased to finish off sheet metal edges and dampen vibration on an old John Deere 316 Garden Tractor I am restoring. Most pleased with the quality of product and the short time to receive the shipment.
Bob
August 3, 2020
These edge moldings and weather stripping are excellent quality and I was able to buy just the length I needed for my application. Because of the reasonable price and custom lengths I was able to buy a range of sizes to try for the perfect fit. Purchased to finish off sheet metal edges and dampen vibration on an old John Deere 316 Garden Tractor I am restoring. Most pleased with the quality of product and the short time to receive the shipment.
Bob
August 3, 2020
Just what I needed
Freddy D
July 15, 2020
Easy to order online. Fast shipment. Product was high quality and as described.
Craig
May 1, 2020
Great product , got here in two days ground!!!
Chuck H
January 19, 2020
I repurposed this trim for the windshield cowl on my 97 Subaru Impreza and it worked great!
Thomas G
September 9, 2019
PN 05-02200 is more flimsy while the PN 05-00951 has a more sturdy mold. There were no inaccuracies with the entire lengths of both PNs and both were left in a continuous length as requested in the comments block when placing the online order.
Using these as trim for coin mat flooring. The PN 05-00951 worked the best for my application.
Ohmega A
April 11, 2019
This channel was exactly as advertised. Unfortunately, I picked the wrong size for my project. Ill order again from Aircraft Spruce.
William H
April 4, 2019
Actually used this to restore some taillights- worked perfectly!!
Donald (
March 24, 2019
Absolutely perfect .I needed 5 feet of gasket. Else where on line, I could find it, but would be forced to buy at least 25 feet. The fact that this company allowed me to purchase only what u needed, was fantastic.
Tony
February 22, 2019
Good cheap quality product. Fast shipped definently great company!!!
Robert H
January 20, 2019
As advertised. Shipped on time.
Jon A
December 13, 2018
Perfect for the job, and , as usual,
excellent delivery time.
Frank K
September 10, 2018
Exactly what I needed
David J
July 12, 2018
Fantastic price, quick delivery and good quality.
this was used to repair a worn out weatherstrip on a BMW Z4 windshield wiper mechanism cover / grille that had deteriorated, saved $250.00.
John
June 12, 2018
Perfect - as expected. Looks like a good quality and it was a quick delivery.
Harry
November 17, 2017
Excellent product and service, was what we needed to put the door window in place on our 1950 7EC. -- Thank you
C. R
October 29, 2017
Perfect and arrived quickly.
Wiley
August 10, 2017
This stuff looks great! I will use it on all my future projects.
Freestyletrailerco.
May 30, 2017
fast shipping. Although our application is for the signage industry, it worked perfect.
Tracey
May 1, 2017
Esam I
Verified Purchase
Rubber Channel & Molding
July 6, 2023
Just as expected.
Lynn A
Verified Purchase
Rubber Channel & Molding
June 7, 2023
Good.
Brian
August 24, 2019
It was gokd quality material. I ordered 15’ of the 1/32X3/8. Id did not
come in a “roll” and was a bit difficult to straighten out as a result. I think I need the next size thicker for my application and will order that soon.
Bill
September 3, 2018
Ive purchased hundreds of feet of this product over the years and frankly, its all about the same. Whats different on this purchase is that it took about 3 hours to clean 40 feet of channel to remove the wax applied by the manufacturer during production. Terrible waste of time.
Jim
May 7, 2018
Too flimsy. Not able to use. Would not hold its shape.
Pat M
September 21, 2020
Too thin and wimpy -- returned and purchased heaver. channe.
George H
Verified Purchase
Rubber Channel & Molding
July 27, 2023
So disappointed in my latest purchase of this item. I have been purchasing this item for years. This order arrived filthy, brittle and twisted. Parts of it I am unable to even open the U channel. This will take hours to clean and even so most of it will be unusable. Not sure what happened to the quality of this item but I am astonished that it would be sent out to a customer in this condition.
Patricia Z
Verified Purchase
Rubber U Channel
June 18, 2022
Actually, I bought this identical product in Nov of 17. I used it as trim on the brake covers on my Grumman Trainer. I just discovered last week that the rubber appears to have rotted and cracked. I am rebuilding this aircraft. It has been stored in my hanger for years. I cannot explain the failure of this product.
Martin T
April 2, 2018