Bayonet knob in-line fuseholder. Supplied with 8" loop of 14-gauge wire and one spring to accommodate AGC fuses. Simple "twist-lock" allows easy fuse removal and replacement. P/N 11-01359 |
Good fuseholder.
Bayonet Knob Fuseholder Fhp-1
Mine was marked Littlefuse Inc P/N FHP1 and came with three springs. Tag says will work with SFE 7 1/2 - 9 - 14 - 20 and 3 AG fuses.
Unit comes with 3 internal springs and only provides codes for which to use. I am using it with a 1A AGC 1 and that option isnt shown. Should call for a fuse LENGTH to determine manufacturer recommended spring. Just makes it more difficult. Otherwise holder is adequate. Sure wish an aircraft part was more insulated from the elements.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This appears to be automotive type wire. No milspec markings.
The max amp rating will based off the fuse size, this uses 14 gauge wire which is rated at 600 volts.