Peckens T
Verified Purchase
Agc Fuse Holder #Hkp-R
September 13, 2024
Thomas G
Verified Purchase
Agc Fuse Holder #Hkp-R
April 17, 2024
Old school fusel holders look great in old school panels. These apparently havent changed in a LONG time because besides being new they look just like the old ones. Terminals take solder well without melting the plastic case. I cracked one of four by overtightening the backing nut but that was my fault. For $3 I have zero complaints.
Brooks M
Verified Purchase
Agc Fuse Holder #Hkp-R
April 1, 2024
Good quality product and fit perfectly
Mike B
Verified Purchase
Agc Fuse Holder #Hkp-R
December 14, 2022
Excellent product which arrived very quickly with very good packaging.
Anne D
Verified Purchase
Agc Fuse Holder #Hkp-R
December 10, 2022
Satisfied with my purchase
Lloyd B
Verified Purchase
Agc Fuse Holder #Hkp-R
November 9, 2022
Real fuse holders with bayonet cap, not like cheaper ones with screw on caps.
Steve G
Verified Purchase
Agc Fuse Holder #Hkp-R
April 29, 2022
Excellent ,quality and price , and flawless ordering ,shipping and receiving! Thank you very much
Frederick P
Verified Purchase
Agc Fuse Holder #Hkp-R
March 2, 2022
J
Verified Purchase
Agc Fuse Holder #Hkp-R
December 29, 2021
Amazing price
Gino C
Verified Purchase
Agc Fuse Holder #Hkp-R
June 5, 2021
Just arrived today, Dec 30, 2020. Thank you
Carolyn B
December 30, 2020
Fast excellent service
Leonard M
December 24, 2020
good product exact replacement for vintage one. I recommend this product.
Dave
July 21, 2020
This fuse holder worked as designed and as expected. It was exactly as I ordered. Thank you.
Gary R
April 16, 2020
Order was received perfectly and part is working as it should.
Paxton C
April 13, 2020
Exactly as ordered and quick.
Daris H
September 14, 2019
This is the exact replacement for the part I was searching for.
Fast shipping!
Thanks Jim
Paul K
September 5, 2019
Excellent Service. Correct Product. Very pleased with this product/organization
James
July 15, 2019
Works good. Good spring tension on the fuse. I like soldered connections I dont worry about them coming loose.
David
June 24, 2019
This review is for the interaction with Aircraft Spruce and the packaging of the fuse holder as the item has not been installed yet.
Aircraft Spruce is a great company to deal with - prompt in processing the order and prompt in shipping. They typically have the best prices and ship from an East coast location. The web site is easy to use and navigate. I recommend Aircraft Spruce and they are my first go to site when looking for parts or information.
Joe M
December 9, 2018
Just what I need to replace the fuse holder for my clock. Price is great too!
Cris A
January 15, 2018
This Fuse Holder would have been much easier to replace if the connections had been the Push-on type instead of the soldier type.
Wilbur T
April 17, 2017
We are satisfied with the parts as expected
Masaji E
Verified Purchase
Agc Fuse Holder #Hkp-R
August 18, 2022
Excellent way to install a fuse without hiding it... It’s all about easy access to inspect or change fuse.
Champion A
Verified Purchase
Agc Fuse Holder #Hkp-R
May 22, 2021
I guess I got a bad one. In the picture of this fuse holder it shows it has a nut in which to tighten it to the panel. Mine didnt have one. Then the cap is not able to turn a quarter turn in which to lock it. Its unusable. At $1.98, I guess it will go in the trash.
Kenneth F
November 6, 2020
Ordered eight, installed them, and three of the plastic nuts cracked at their thin area (where it is cutout to allow it to go over one of the terminals). The first one was probably because of my overtightening. It has to be tight to keep it from turning when removing or installing the fuse, but if it is torqued too tight, it cracks. A Balancing act. After that, I tightened just barely. 30 minutes later I looked over the piece and the second and third nuts were in pieces below where they were mounted, also cracking at the same thin point as the first one. They just dont like to be tightened.
I used Blue Loctite on all eight, and there may have been a chemical reaction between the Loctite and the plastic nut that caused them to fail.
The product must be trustworthy since it isnt fused and if it slips free because of a cracked nut, there could be a fire. Some things just shouldnt be made as cheaply as possible and this is one of them. To get it trustworthy requires it to be tight, or to have Loctite on the threads, and since neither of these are acceptable installation methods, the fuseholder is useless to me. Zero Stars. Now I have to go to the hardware store try to find some metal nuts for these things.
John J
June 9, 2020
Sorry it doesnt work for my amp, I have fender deluxe III ... i just was looking for a fuse hold... the fuse hold you guys sent me it doesnt work
Juan
May 2, 2020