LOCK OPEN OIL DRAIN VALVES Changing hot engine oil has never been easier! With the SAF-AIR oil drain valve, no wrench is needed to remove the drain plug. A simple push and turn of the SAF-AIR valve locks it in the open position. The valve is made completely from anodized aluminum and stainless steel components. These materials are used throughout the aircraft industry due to their strength and durability. FAA & PMA APPROVED. Product Notes:
|
Have not fitted items yet but they are as ordered.
Saf-Air Oil Drain Valve M12175
Perfect product. Makes oil changes super easy!
Saf-Air Oil Drain Valve M12175
Item is as described. Makes oil changes much easier.
Saf-Air Oil Drain Valve M12175
Bought this for 2 Rotax 912. Works great, no mess when draining oil.
Saf-Air Oil Drain Valve M12175
Grea
Simple, straight forward replacement. Ease of use is beyond compare.
I installed this valve and the adapter in my Rotax 912 yesterday. They installed easily, as expected.
This drain valve has a double “O” ring seal against oil leaks, very nice. The one issue I have with it and the reason for four stars is the pin that holds the valve open to drain the oil is tiny leading me to think it won’t take much for it to fail. I could be wrong about this, it may be adequate for the job, just doesn’t seem Like it.
Saf-Air Oil Drain Valve M12175
Should have noted that a spacer was required for newer Rotax oil tanks.
Purchased two for my Aircam after reading the application chart provided by ACS. Nothing stating that they do not fit the late model tanks. But if you check the entire accessories listed you will find there is an adaptor required on late models as the baffles have changed. My problem is I dont have roam for the adaptor. Because I was stupid (according to ACS) I cannot return as they have been installed. Only found out they will not work when I tried to drain oil . Lesson learned
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, see Part# 05-00986, SAF-AIR S5020J OIL DRAIN VALVE.
Their chart shows 3 total o-rings. MS28775-009, MS28775-010, and MS28775-011.
This will use a 3/8" ID hose.
The M12175 can be mounted horizontally. The valve has a 3/4 inch hex on it.