THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278

Cascophen Resourcinal Adhesive Pt

$67.75/Each
Part# 02-00036

Overview

Resorcinol-formaldehyde resin adhesives should be hardened/cured with an appropriate Cascoset catalyst.​

Cascophen Adhesive System G-1131A with Cascoset G-1131B is a two component resorcinol formaldehyde resin adhesive, capable of curing at room temperature and providing strong, waterproof bonds of utmost durability.

Applications

  • Assembly woodworking glue
  • General marine use
  • General aircraft use
  • Exterior service applications
  • Radio frequency finger jointing

Reviews

Love this resin. Plenty of working time yet sets up nicely at 70F. Water cleanup is nice and any thin residue sands off easily

Brock L Verified Purchase

Cascophen Resourcinal Adhesive Pt

April 16, 2024

5

Dan W Verified Purchase

Cascophen Resourcinal Adhesive Pt

March 2, 2024

I have been using the cascophen (resorcinol) glue for years and have always been pleased. I have never had a failure. The “water cleanup” is very convenient. I have also found that with proper storage the one year “use by” date is a very very conservative recommendation.

Ned L
November 8, 2022

good product.

Lewis P Verified Purchase

Cascophen Resourcinal Adhesive Pt

November 1, 2022

I used this glue for my Osage bow handles! work great very pleased thanks

Richard K
October 22, 2022

Excellent! Would buy from them again.

Omar P Verified Purchase

Cascophen Resourcinal Adhesive Pt

December 29, 2021

The shipping, delivery, and price of the 1-qt order were excellent. The product is as anticipated.

Bill S
May 1, 2020

I havent used it yet. But I did like the expedient service

Alan T
July 25, 2019

The other review on this product has nothing to do with the product but with the shipping, so the one star rating it gives is not fair to the product. This is an excellent adhesive for gluing and laminating wood. It is truly waterproof and retains its strength in hot and humid or wet environments. It is also highly resistant to chemicals and solvents. As with any adhesive or laminating resin system, read and follow the instructions carefully, measure and mix carefully, be mindful of the working times and pot life vs ambient temperature, and Cascophen will yield excellent results. Highly recommended for aircraft woodwork and other select adhesive tasks per the instructions.

David J
June 24, 2019

I am building a new set of hatches for my classic boat. I was looking for resourcinal to glue up some teak lumber. I removed the pieces from the clamps this morning. It is solid as a rock. I also glued up some test scraps. I used pliers to try to break the bond - the wood broke first. I will update this with a 5 star review after I see how the product performs over time, but Im very happy with the initial results. The package didnt include the mixing instructions, but they were easy to find and download on the Aircraft Spruce site.

Jon B
April 12, 2021

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: what are the mixing ratios?

It is a 5 to 1 mix ratio by weight.

Q: When this dries, is it brownish in color?

Per the tech data sheet, it does not specify which color it dries. However, it does mention that Part B Hardener is tan in color.

Q: Does the pint kit make a pint of glue? Or is each can a pint? Thanks, Bill

Part A contains the described amount, example a pint, but after adding Part B, the kit yeilds a little more than described amount. In short this is a two part adhesive, and is mixed 5 to 1, and part A contains a pint, quart, etc.., but when mixed with part B you have 1/5 more usable material to glue parts with.

Q: Do you have the tech data sheet for this Cascophen? What is the mixing life?

We have added the Tech Data and Instructions PDF to the "Documents" tab of this email. The mixing life is included in the tech data sheet.

Q: What is the approximately coverage in square foot for a quart? Regarding Cascophen. Thanks.

The manufacturer does not give a coverage area, but other similar adhesives have a 12 to 18 sq ft coverage per gallon.

Q: Is this FAA approved? Can an 8130 be furnished for it?

Cascophen does not carry FAA Approval and is not required to be approved. 8130 cannot be furnished however there is a certificate of analysis available.

Q: What is the shelf life of this product? Is it appropriate for wood propeller lamination?

As a kit, A&B parts, it has an 8 month shelf life. One year for part A, and 8 months for part B. You will need to contact the prop manufacturer to determine the adhesive they recommend for repair on their prop. Cascophen is a resorcinal-formaldehyde base adhesive

Q: How is the Cascophen G1131 mixed?

Some typically make larger batches and mix with a paddle or paint mixer on a 1/2 drill. For smaller batches they could just use a spoon or stick of some sort. It would be advised adding the powder to the mixing bucket prior to the liquid as this will reduce the likelihood of the powder getting airborn.

Q: Is it possible to use this instead of epoxy for carbon fiber or kevlar fabric and vacuum bagging? Seems stronger and stiffer that West Systems epoxy

Cascophen is more of an Adhesive, Vacuum bagging will work better with resins such as west system, MGS,Aeropoxy and Makobond.

View in Catalog

View Image View in Catalog