SAE Size | Description | Min | Max | Part Number |
---|---|---|---|---|
6 | Breeze Clamp 9406H | 7/16" | 25/32" | 05-14930 |
An integral extension of the band as an inner liner protects soft-surface hose (silicone and others) from damage caused by extrusion or shearing through the band slots. Liner clamps afford maximum protection to soft hoses while providing a true concentric seal. Standard 1/2” (12.7mm) band 5/16” (7.9mm) slotted hex head screw Per SAE standard J1508 Type “F” |
These screw hose clamps are designed a bit differently than the usual in that when a correct size is use, the hose rubber is separated from the screw by smooth flat interior perimeter metal. As such, the clamp does not cut into the hose plus looks more airplane than the commonly available box store hose clamps.
Breeze Clamp 9406H
Breeze Clamp 9406H
These clamps were perfect for attaching high pressure hoses to quick connect fittings for agricultural spot sprayer.
Breeze Clamp 9406H
I like the clamps so far. The smallest one I used on oil return lines and they are the hardest to close down, and one of them jammed and couldnt be used again
Breeze Clamp 9406H
Never used this kind of clamp before but needed it for silicon hose, I dont know if Ill ever use traditional worm drive clamps again. Their simply awesome.
Breeze Clamp 9406H
High quality clamps
Breeze Clamp 9406H
I got these for some silicone tubing on my aquariums and they work great . This company had the best price and shipping was fast . Highly recommend .
Good quality clamp
Ordered different sizes clamps, made of stainless steel, great clamps not only for silicone hoses but for all hoses to minimize cutting into the hose..
Quality silicone hose clamps
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Standard 1/2 (12.7mm) band
Yes these are full stainless.
These are a combination of 300 and 410 series stainless. The minimum on this clamp is 7/16. You would probably want a 6504 clamp for your fuel lines.
The "H" clamps have a liner to protect the hose.
The screw is a 410 grade stainless which will have a magnetic draw, per the manufacturer.