SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

Rejex High Gloss Finish 16 Oz

$35.95/Each
Part# 09-00303
MFR Model# 61002

Overview

RejeX® is a proprietary thin film polymer coating technology designed to provide a high-gloss / ultra-high-release surface. RejeX is commonly used as a paint sealant providing a better performing alternative to wax-type products for owners who want to maximize protection and shine on vehicles of all sorts, including aircraft, cars, motorcycles, boats and RVs.

RejeX has a higher refractive index than any wax, so it produces richer, deeper looking colors. The product dries water clear, and unlike wax-based products, never yellows. This highly durable coating produces a deep, lustrous shine that outlasts other products by months.

This very thin film, only tenths of a micron thick, reduces adhesion of all common contaminants such as road grime, exhaust, oil, bug splats, bird droppings, brake dust, tree sap, pollen, tar and grease. RejeX also provides exceptional UV protection. it is even effective against the dreaded love bugs!

RejeX can also be applied to windshields (glass, Lexan, acrylic, etc.) to repel rain and make bugs splats easier to remove.

RejeX has recently been awarded the GSA National Stock Number 8030-01-593-8208 for use on all NATO destroyers and cruisers armed with the AEGIS defense system.

RejeX contains none of the free silicone oils found in some other polymer products that are known to contaminate paint and cause issues when repainting.

PRODUCT NOT FOR SALE OR USE IN THE STATE OF CALIFORNIA

Application Notes

  • As RejeX cures, the polymers cross-link into a crystal-clear, flexible, chemical- and contaminant-resistant film. It is very important to allow RejeX to cure for 8-12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, hard water, cleaners, etc. before it has cured, the contaminants may interfere with the integrity of the film, affecting its visual characteristics and release properties.
  • RejeX SHOULD NOT be used on porous surfaces, highly textured surfaces (such as the plastic/rubber trim on some SUVs), oxidized painted surfaces or oxidized (chalky) gelcoat/fiberglass. If a painted / gelcoat surface is worn/oxidized, polish to remove "dead" oxidized paint and gel coat / fiberglass before applying RejeX.

    Buffers work just fine for applying / removing RejeX. If you use a buffer, do not apply RejeX with pressure, simply use the buffer to spread out (and/or wipe off) the product.

  • RejeX can be applied in multiple coats – allowing at least 4 hours curing time between coats – for greater depth of gloss and extended longevity.

  • RejeX can be used over existing wax, however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. Waxes can be applied over RejeX, however many of the benefits of RejeX may be negated and the wax finish will typically not last very long due to adhesion limitations. It should also be noted that many waxes (particularly those products described as "restorer waxes") and all polishes contain abrasives, which can strip the thin RejeX film.

  • If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required. Abrasive cleaners, polishes or rubbing compounds will remove the RejeX film.

Instructions

  1. 1.Shake well.
  2. 2.Apply to a clean, dry surface that is cool to the touch. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F. On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. For larger vehicles such as RVs, busses and yachts, a good trick for dealing with hot days is to apply RejeX to the top and western facing side in the morning and the eastern facing side in the afternoon, so that you're always working on the shady side.
  3. 3. After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX should wipe off easily.
  4. 4.Allow RejeX to cure for 8-12 hours out of the elements. The higher the humidity, the faster RejeX cures.
  5. 5.While it is not uncommon for a RejeX treatment to last well over a year, for optimum protection, reapply every 6 months or as needed (e.g. when bugs and other contaminants begin sticking to leading edges of wings and front bumpers, when brake dust begins sticking more tenaciously to wheels, etc.).

Reviews

Love the look after applying Rejex. Easy on and easy off product.

Derek L Verified Purchase

Rejex High Gloss Finish 16 Oz

October 4, 2024

Thanks for asking I used rejex on my rv years ago and it was great then I tried other brands and they didn’t last as long so I had to go back thru my orders from amazon and tried to reorder but it was on back order so I went to your website and ordered it and I just used it this week I fallowed the directions and let it dry for 10 minutes but I was hard to take off So I reached out to Michael Vega on your staff and he told me he had the same problem and it was ok to buff it off within a couple of minutes after putting it on it was much better. You might want to check that out maybe because my rv is a gelcoat finish Thanks Frank

Frank S Verified Purchase

Rejex High Gloss Finish 16 Oz

May 18, 2024

Easy to apply and buff. Great finish. Finish like smooth glass and great shine. I polished the car first with a battery drill and sponge pad to remove paint swirls and smooth finish. Applied the Rejex by hand and buffed off by hand. Smooth gloss finish. I park inside and wax once per year.

Brian D
September 26, 2023

a great product that does all it says it does. Maybe a bit pricey but still a good product.

Bill J Verified Purchase

Rejex High Gloss Finish 16 Oz

July 27, 2023

Great product, I will buy again. Easy to applied with great result .Hopefully now it will last for a few months until the next application.

Jacques C Verified Purchase

Rejex High Gloss Finish 16 Oz

May 24, 2023

Rejex is an outstanding product for both aircraft and autos.

Berry S Verified Purchase

Rejex High Gloss Finish 16 Oz

October 19, 2022

Excellent Product

Glenn M Verified Purchase

Rejex High Gloss Finish 16 Oz

August 31, 2022

I just applied Rejex on my RV. It goes on easy and you dont need much so a bottle will last for several applications. Ill see how it holds up after a couple of months and follow up with another review.

Joanne M Verified Purchase

Rejex High Gloss Finish 16 Oz

July 7, 2022

Rejex is my go to final finish on everything, boat, RV and vehicles. Good on glass also.

Dave J Verified Purchase

Rejex High Gloss Finish 16 Oz

May 19, 2022

I have been using this produce for a few years now and there is nothing that compares to it. Its a great product.

Marvin W Verified Purchase

Rejex High Gloss Finish 16 Oz

April 27, 2022

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Can this Rejex protector be shipped, in company with other items, by air to Australia?

Yes, this is not considered hazardous goods. No problem shipping to Australia via air.

Q: How many square feet does a 12 oz. bottle of Rejex cover?

Per supplier: The 12oz bottle covers a 22 foot RV, so at best guess we can say it covers 150 to 200 square feet.

Q: How is this Rejex stain pretector against exhaust that hazes the belly of a plane?

It will certainly help keep the soot,exhaust and oil from sticking to the paint on the belly. It will also make it easier to clean.

Q: The description says it is not going to work on oxidized paint. What should I do to prep the painted surface before applying rejex?

If your paint is oxidized you would want to compound and polish it before applying Rejex.

Q: Once the surface is treated - will applying degreaser to clean exhaust stains etc get rid of the Rejex treatment?

Yes, eventually the degreaser would remove the Rejex. But you should be able to clean the soot off with less aggressive products if Rejex is on the surface.

View in Catalog

View Image View in Catalog