Makes a 2-1/4" EI instrument look excellent in a 3-1/8" mount. Black anodized, brushed alumnimum matches the instruments. Use the A-103 to mount the UGB-16 in a 3-1/8" hole. E.I. products include all documentation and certifications |
received exactly as described, would buy again if needed
as advertised, worked great, heavy duty
Does what it’s suppose to. The outer holes are threaded, and comes with 4 screws. It’s pretty thick, and would support any instrument. I used it to mount a EI usb charger in a larger hole.
Fits the bill. Clean cuts, good quality anodized finish.
Good way to put in newer lighter 2-1/4 instruments such as the Belite Turn Coordinator into a 3 1/8 mount. Good quality machined part.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
3-3/8" x 3-3/8"...square.
The FS-450 is a 2-1/4" instrument so the 3-1/8" TO 2-1/4" Adapter plate, part# 10-01051 will work.
No, the A-102 does not come with the mounting hardware.
The A-103 adapter is specific to the UGB-16 unit.
We would recommend looking at part # 10-00010.
You would typically use brass 6-32 screws, but all panels are different so we could not give you an exact length.