Description | Part No. |
---|---|
CHT PROBE, TYPE K (Hose clamps not required) | 11-01023 |
**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges. |
Good but to short for my Project and i must return
CHT Probe, Type K
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the AN5541-1 will fit into the 10-00374 CHT adapter.
All of these Universal replacement probes are grounded.
All of these Universal replacement probes are grounded.
Yes, the Insight Gem uses a type K grounded probe.
The clamp included is 1.56"-2.5". A 3.5" clamp can be ordered separately.
The wires are about 1ft long. To extend the leads, you will need type k thermocouple wire.
JPI recommends using their probes on their engine monitors.