Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
King Kx 200 Nav COMMGS With 28V Retrofit Adapter
MFR Model# 89000002-120-28
Overview
|
General aviation’s newest and most advanced NAV/COM radio is pilot-friendly by design. That’s because we consulted pilots at every phase of a development process that started with a blank CAD screen and ended with the creation of a groundbreaking new radio for the 2020s and beyond. The BendixKing KX 200 is an easy direct replacement with the same footprint as your current KX 155/165 radio. But that is where the similarity ends. The KX 200 features:
BendixKing Makes Upgrading to the KX 200 Easy Moving up to the KX 200 couldn’t be easier, since it’s a direct replacement for your current KX 155, 165 and can substitute other radios using the same tray and connector. That also means the KX 200 is compatible with existing equipment, which reduces both cost and aircraft downtime during the conversion |
Specifications
| Supply Voltage | 14 and 28 volt system |
|---|---|
| Current consumption | ≤ 750 mA @ 12V; RX RX stand-by mode ≤ 400 mA @ 28 VDC; RX stand-by mode ≤ 2.5 A @ 12 VDC; TX mode (m ≥ 70%, 1 kHz) ≤ 1.8 A @ 28 VDC; TX mode (m ≥ 70%, 1 kHz) |
| Operating temperature | -20…+55 °C |
| Control interface | COM: RS422 NAV: RS422 |
| Dimensions HxWxD (install. Depth) | 52.1 x 158.8 x 224 mm (2.1 x 6.3 x 8.8 inch) |
| Weight | ≤ 1.5 kg |
| COM Transceiver | |
| Number of channel memory | 50 + 10 Last |
| Channel labeling | Yes |
| Receiver | |
| Frequency range | 118.000- 136.991666 MHz |
| Channel spacing | 8.33 / 25 kHz |
| Modulation | AM |
| Audio frequency response | 350…2500 Hz @ 8.33 kHz channel spacing 350…3000 Hz (typically 300…3400 Hz) @ 25 kHz channel spacing |
| Sensitivity | ≤ -93 dBm (typically -101 dBm) for AM 30%, 1000 Hz |
| Spurious response | ≥ -33 dBm |
| Dual watch (SCAN) | Yes |
| Climax operation | YES, Class H2 receiver |
| Frequency change notification | Yes |
| Squetch threshold | 6…26 dB |
| Single / multicarrier distortions | ≤ 25% (typically ≤ 15%) for AM 85% |
| Transmitter | |
| Transmitting power | ≥ 6 W @ 14 VDC, ≥ 10 W @ 28 VDC |
| Modulation capability | ≥ 70%, ≤ 95% |
| Frequency stability | better than ± 5 ppm |
| Modulated audio distortion | ≤ 15% |
| Modulated audio response | 350…2500 Hz |
| Stuck PPT | 35 s |
| NAV Receiver | |
| NAV channels | 108.00 … 117.95 MHz |
| Number of channel memory | 50 + 10 Last |
| NAV sensitivity | -93 dBm, -107 Dbm (typically) |
| VOR/LOC output | Composite signal for external VOR/LOC converter and indicator |
| Auxiliary power supply output | up 500 mA |
| ILS energize output | Open collector to ground discrete output |
| DME channeling | Serial DME channeling provided for KN 62A, KN 63, KN 64 |
| NAV audio output power | ≥ 100 mW @ 500 Ω, ≥ 100 mW @ 600 Ω |
| IDENT notch filter | ON/OFF |
| GS channels | 329.15…335.00 MHZ |
Documents
In The Box
- King KX 200 NAV/COM With GS
- King KX 200 Retrofit Adapter (Optional)
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per BendixKing: Yes it will, that is the beauty of direct replacement, it will work with all existing components.
No, this is an analog radio and cannot interface to a digital glass panel.
Yes, this will come with a tray as well.
Yes, this will work with the KX-200 but it will have limitations on its capabilities.
No, it will not replace a KX-175.
Per BendixKing: The KX-200 has been designed to directly replace existing legacy KX-155 and KX-165 radios. For 14 and 28 volt applications, a separate adapter is required for each of these installations.
Per BendixKing: The KX-200 has been designed to directly replace existing legacy KX-155 and KX-165 radios. For 14 and 28 volt applications, a separate adapter is required for each of these installations.
Yes, the 14v adapter would be required here.
This item will come from Aircraft Spruce once our stock is received.
Per BendixKing: The adapter will be mounted on to the back of the KX 200 to allow the "slide-in" replacement from the KX radios. The mounting and connector of the KX 200 is slightly different than the KX radios, so the adapter will allow the installer to just slide in the KX 200 without any wiring changes.
As a new install, as in not replacing a KX radio, the adapter will not be needed.
