1-877-795-2278 | info@aircraftspruce.ca
Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278
- Photo may represent series and not specific product
- SHARE
Type 1 Aircraft Grnd De-Icing Fluid 5G Concentrate
$543.00/5 Gallon
Part# 12-05520
MFR Model# FX5G
MFR Model# FX5G
Overview
|
Type I De-icing Fluid is a propylene glycol based de-icing product intended for use during ground de-icing of an aircraft. Sprayed onto the plane frame and wings to help remove the buildup of frozen containments (ice, snow and frost) prior to flight. This helps with aerodynamics to keep the plane flying safely and efficiently They're typically sprayed hot with a handheld or powered sprayer.
Note: Minimum allowed RI for corresponding dilution to meet LOUT requirements. Any dilution higher can be used up to the highest allowed dilution (65/35). Any mixture above 65/35 must not be used. |
Cautions
- Any user of this product is responsible for determining the suitability of Safewing MP 1 LFD 88 product for its particular application. The Pilot-in-command holds the ultimate responsibility to remove all frozen contaminants from critical aircraft surfaces and components, to conduct visual and tactile inspection to the aircraft after de-icing/anti-icing procedures and prior to takeoff, and to ensure that the aircraft is safe for departure. Ground de-icing and anti-icing fluids provide no protection against icing in flight.
Specifications
- Type 1 De-icing Fluid, Safewing MP 1 LFD 88
- This fluid meets the latest SAE Type I and AMS 1424
- specifications for aircraft de-icing.
- Propylene glycol is used in this product, to ease health and environmental concerns.
- Type I fluids are always applied heated and diluted.
- Suitable for use at temperatures down to -33°C (-27°F) (LOUT)
- Fully biodegradable
- Low foaming fluid with excellent wetting properties that entirely covers aircraft surfaces to avoid premature re-icing of already treated surfaces.
- Can be stored up to 2 years under proper conditions.
- Type 1 Aircraft De-icing Fluid RTU must be heated, in accordance with FAA approved de-icing/anti-icing program. This FAA approved program should reference SAE ARP 4737 & ISO 11076.
Water Quality
- Tap water may or may not be applicable for diluting SafewingŪ MP I LFD 88. This decision belongs to the end-user. Water can be checked by Clariant at any time to assist you in this process.
Documents
Storage Requirements
- SafewingŪ MP I LFD 88 can be stored in a variety of containers, ranging from mild steel tanks to plastic totes (high-density). Please keep the fluid tightly closed and store it under proper conditions. It is recommended to examine storage and vehicle tanks annually to check if corrosion or contamination has occurred. SafewingŪ MP I LFD 88 consists mainly of glycol and therefore is sensitive to over-heating. Do not store the fluid at temperatures higher than 90 °C for a long time to prevent decomposition of glycol.
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Q: What is the dilution ratio of fluid and water for this product?
55/45. 55% fluid with 45% water.
Q: How do we obtain a SDS for this Type I ground de-ice fluid?
We have added the SDS to the web page for download and review.
Q: Type 1 deicing fluid is orange (as indicated on the SDS), yet the photo provided shows a blue fluid. Is the product orange or blue?
This is a clear orange liquid per the SDS.
