FREE SHIPPING ON ORDERS OVER $699 (SOME EXCLUSIONS APPLY) | 877-795-2278

Noral 2 Cushion Type A Black

$181.75/Each
Part# 13-00327
MFR Model# NR-24

Overview

This seat is made of 1000 denier Nylon water repellant fabric and 2 lb. fire resistant foam inside that meets the FAA regulations. It features a high back with a Lumbar Support for added comfort. A strap is present for easy carrying and securing the cushion to the back of the seat when installed. Seat (cushion) is available in 2 inch, 3 inch, and 4 inch thickness. Intended for larger aircraft such as Cessna 172, 182, 210, or Cardinal.

Please specify size and color when ordering.

Specifications

  • Type 'A' seat fis Cessnas 172/182/172 Cutlas /210 and other larger seats
  • Seat Dimensions: Depth (back to front) 17.5 inches, Width (left to right) 15 inches
  • Back Support Dimensions: Height: 20 inches, Width 15 inches, Back Thickness 2 inches, Lumbar Support Thickness 2.75 inches

Reviews

The seat in the 69 C172K I fly only has 2 seat-back positions. One is too low for me, and is too high for me. With this, the low position is just right for comfortable reach of all controls while still sitting high enough up to see properly. Im 510 with long legs.

Ludvig R Verified Purchase

Noral 2 Cushion Type A Black

December 7, 2021

As advertised and delivered on time.

Bruce D
July 15, 2020

I purchased two , high quality, good material, perfect fit to my 182 seats. Fit me just right. My pilot wife needed a little different bottom cushion, the fact the cushions have zipper, we had a cushion fabbed that works well. These are a very good product!

John C
July 7, 2020

This is a very well made seat that will work perfectly in my Kolb Firestar 1 ultralight aircraft.

Dan H
October 29, 2019

Bought it for my 15 yr old son and he was delighted. Now he can see over the instrument panel of our 182. Does the job perfectly.

Chris
June 3, 2019

David D
August 2, 2018

I plan to use in my OneX I’m building. I like the cushions because they have zippers allowing me to replace foam if needed. Also the added lumbar support is a nice feature. In my case, the bottom cushion needed to be orientated sideways to avoid interference with control stick which works ok, nice because cushions can be detached. Saved me over $200-$300 from custom made seat cushions.

Tom H
November 30, 2017

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the weight of 2 inch Noral Seat Cushions with Back - Type A?

The weight of the 2 inch cushions (part #'s 13-00327 and 13-00329) is approximately 2.25 lbs.

Q: I have a Piper Archer, would the booster seat fit?

We do not have an application guide that provides info on which aircraft these will fit in. You will need to measure your seat area to confirm the dimensions will work.

Q: How thick is the seat back cushion?

The back is 2" thick on this model.

Q: Is the back cushion detachable?

Yes the back is removeable.

View in Catalog

View Image View in Catalog