Prior to the introduction of the Aerox system, wise pilots reserved the use of oxygen for situations where it was legally necessary, i.e. above 12,500 ft. This was often a practical decision based upon factors like: Short duration of supply, uncomfortable masks, difficult & costly refills, heavy weight and large bulk. Aerox systems address these objections with advanced designs and materials that help make oxygen use easier, more comfortable, and less expensive than ever before. Add to your flying comfort by using oxygen at altitudes as low as 5000 feet. Aerox Oxygen Systems include lightweight aluminum cylinders, regulators, all hardware, flowmeter, and nasal cannulas (masks available as an option). Oxysaver oxygen saving cannulas and Aerox Flow Control Regulators increase the duration of oxygen supply about four times, and prevent nasal irritation and dryness. The Emergency Oxygen Packs are lightweight aluminum, refillable, & have no life limit. Just put on the mask and open the valve; no adjustment is needed. Complete brochure available on request. Low profile • 1, 2, & 4 place • Standard Aircraft filler for easy filling • Convenient top mounted ON/OFF valve • Equipped with Aerox standard plug sockets • Over pressure safety valve • Built in cylinder pressure gauge |
Note: All systems include flowmeters and cannulas and require refilling adapter unless at an airport.
Worked well. Zero issues.
Aerox Aviation Oxygen System 4M 22 Cu Ft 4 Place
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The tank size and shape is the only difference. 13-18906 has a shorter, fatter M tank, and 4E-500 has a longer thinner E tank.
No the bag must be ordered separately, it is our part number 13-18990-M.