Overview

Specifications

• 100 lbs (45.5Kg) shipping weight

In The Box

• 1 - Homark 22” Tool Box
• 1 - 2x, 3x, 4x or 2602a Rivet Gun
• 1 - Air Regulator
• 1 - Rivet Set (An470, 3/32”)
• 1 - Rivet Set (An470, 1/8”)
• 1 - Rivet Set (An470, 5/32”)
• 1 - Rivet Set (An470, 3/16”)
• 1 - Offset Rivet Set (3/32”)
• 1 - Offset Rivet Set (1/8”)
• 1 - Offset Rivet Set (5/32”)
• 1 - Offset Rivet Set (3/16”)
• 1 - Flush Rivet Set
• 1 - Rubberguard Set (1”)
• 1 - Rubberguard Set (1-1/2”)
• 1 - Bucking Bar
• 1 - Bucking Bar
• 1 - Bucking Bar
• 1 - Bucking Bar
• 1 - Bucking Bar
• 1 - Bucking Bar
• 120 - Clecos (3/32”)
• 120 - Clecos (1/8”)
• 120 - Clecos (5/32”)
• 120 - Clecos (3/16”)
• 4 - Side Grip Fastener
• 4 - Spring Tension Clamps
• 10 - Wingnut FastEner (3/32”)
• 10 - Wingnut Fastener (1/8”)
• 10 - Wingnut Fastener (5/32”)
• 10 - Wingnut Fastener (3/16”)
• 1 - Cleco Pliers
• 1 - Rivet Cutter
• 1 - Adjustable Microstop
• 1 - Pilot Cutter (3/32)
• 1 - Pilot Cutter (1/8)
• 1 - Pilot Cutter (5/32)
• 1 - Pilot Cutter (3/16)
• 1 - Dimple Die Block Set
• 1 - Dimple Die Set (3/32)
• 1 - Dimple Die Set (1/8)
• 1 - Dimple Die Set (5/32”)
• 1 - Dimple Die Set (3/16”)
• 1 - Squeezer Set (3/32”)
• 1 - Squeezer Set (1/8”)
• 1 - Squeezer Set (5/32”)
• 1 - Squeezer Set (3/16”)
• 2 - Squeezer Set (Flush 1/2”)
• 2 - Squeezer Set (Flush 3/8”)
• 1 - Dimple Die Organizer
• 1 - Hand Rivet Squeezer (3”)
• 1 - Longeron Yoke
• 1 - 4” Yoke
• 1 - Close Quarters Yoke
• 1 - Bench Mount
• 1 - Hand Seamer
• 1 - Hole Flanging Tool
• 1 - Safety Wire (.032)
• 1 - Burnishing Tool
• 1 - Fluting Pliers
• 1 - Circle (Fly) Cutter
• 1 - Adjustable Hole Cutter
• 1 - Speed Deburring Tool
• 1 - Hand Nibbler
• 1 - Chip Chasers (4” & 8”)
• 1 - Crimper
• 1 - Reversible Air Drill
• 2 - Cobalt Drill Bits
• 2 - Cobalt Drill Bits
• 2 - Cobalt Drill Bits
• 2 - Cobalt Drill Bits
• 1 - Drill Stop (3/32)
• 1 - Drill Stop (1/8)
• 1 - Drill Stop (5/32”)
• 1 - Drill Stop (3/16)
• 1 - 6” Cobalt Drill Bit
• 1 - 6” Cobalt Drill Bit
• 1 - 6” Cobalt Drill Bit
• 1 - 6” Cobalt Drill Bit
• 1 - Strap Duplicator (3/32)
• 1 - Strap DuPlicator (1/8)
• 1 - Strap Duplicator (5/32”)
• 1 - Strap Duplicator (3/16)
• 1 - Automatic Center Punch
• 1 - Aircraft Mech. Manual
• 1 - Rivet Removal Tool
• 1 - Angle Drill Attachment
• 2 - Threaded Cobalt Drill Bit (#40)
• 2 - Threaded Cobalt Drill Bit (#30)
• 2 - Threaded Cobalt Drill Bit (#21)
• 2 - Threaded Cobalt Drill Bit (#12)
• 1 - Offset Snip (Left Cut)
• 1 - Offset Snip (Right Cut)
• 1 - Bender Brake (18”)
• 1 - 6” Rev. Wire Twister
• 2 - Clamps