FREE SHIPPING ON ORDERS OVER $699 (SOME EXCLUSIONS APPLY) | 877-795-2278

Met-L-Chek FP-923 Fluorescent Inspection Penetrant

$29.70/Each
Quantity
Add to Wishlist
Part# 09-05863
MFR Model# FP-923

Overview

FP-923 is used for the detection of fine cracks, porosity, and through leaks on metals, composites, synthetic materials, and some plastics. The materials used are low in sulfur and halogens, VOC free, and safe for use on all metal surfaces. It is bright yellow, smooth washing and non-gel forming, allowing a clean wash cleanly from rough surface. It is applied by immersion, spray, or wipe on and is approved for high sensitivity aerospace applications.

For Method C applications it is used with E-59, E-59A, R-503, and R-504.

Physical Properties

  • Form: clear yellow green liquid
  • Density: 918 g/L
  • Flash Point: > 93˚C (> 200˚F)
  • Viscosity 11.3 mm2 /s
  • Water Tolerance:> 10 %
  • Water Content: < 1 %
  • Fluorescent Brightness: (AMS-2644 requirement > 90 %)
  • 117.7%Corrosion of aluminum: none
  • Corrosion of carbon steel: none
  • Corrosion of magnesium: none
  • Corrosion of stainless steel: none
  • Corrosion of titanium: none
  • Chloride content: < 100 ppm (0.01%)
  • Fluoride content: < 50 ppm (0.005%)
  • Sodium content: < 100 ppm (0.01%)
  • Sulfur content: < 100 ppm (0.01%)
  • Mercury: none
  • VOC’s: 0 g/L
  • Ozone layer depleting substances: none
  • PCB’s: none

Approvals

  • AMS-2647
  • ASTM E-165
  • ASTM E-1417
  • ASME B&PVC
  • NAVSEA 250-1500-1
  • T9074-AS-G1B-010/271
  • Boeing BSS 7039 & BAC 20-20-0
  • Pratt & Whitney FPM PMC # 4360-7
  • General Electric Aircraft Engines 70-32-02 & Gas Turbines LM6000 PC 11
  • Rolls-Royce RPS-702-7
  • CSS 232; OMat # 651D, RRP 58003C
  • Safran In-5000c: Snecma sensibilité S3.

Reviews

good

Rene S Verified Purchase

Met-L-Chek Fluorescent Penetrant 16Oz Aerosol

July 11, 2023

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

View in Catalog

View Image View in Catalog