Havent tried it yet. Good quality tool.

Joseph J Verified Purchase

Oil Filter Cutter Krc-1203

Works great!

Kyle W Verified Purchase

Oil Filter Cutter Krc-1203

Works great!

Chad O Verified Purchase

Oil Filter Cutter Krc-1203

Straight forward and easy to use. Did exactly what I wanted. I only do one oil filter a year.

Mike D Verified Purchase

Oil Filter Cutter Krc-1203

As usual with Aircraft Spruce, my shipment arrived very quickly. The oil filter cutter was used shortly there after to open and inspect the guts of my oil filter following an oil change. The product is simple and intuitive to use and cleanly separates the top from base of the filter. Id forgotten, however, how much oil was left inside the filter. In the future, Ill separate the two halves inside a plastic bag!

Claude P Verified Purchase

Oil Filter Cutter Krc-1203

Works very well. It’s larger and more heavy duty than it looks in the picture.

Casey M Verified Purchase

Oil Filter Cutter Krc-1203

Worked great! Instructions say to put it in a vise but just holding it in my hands I had the filter cut cleanly in less than 30 seconds.

Richard C Verified Purchase

Oil Filter Cutter Krc-1203

I previously wasted my money on an automotive-type oil filter cutter. In order to use it, it required me to cut off the male fitting on my airplanes filter with a hacksaw, which needed great caution not to introduce metal debris to the filter element. It also cut the outer casing too close to the flange, making removal of the filter element almost impossible. This one makes it easy. Before use, it is necessary to change out the installed automotive cutter support to the longer one for aviation filter use, and the narrower guide for insertion into the aviation male filter connector. Both items are included with the cutter.

Works very good

there is one part missing, this cutter works great, but you need the cutter, for automotive also, because some filters have different heights to them, all in all a great product.

Works well. Tip: Keep a little pressure on the top of the filter, towards the cutting wheel as the oil filter is turned. This keeps the wheel pressing against the side of the filter and tracking a straight cut.

Easy to use and the price is good.

Heavy duty, solid aluminum. The quality is what youd expect for a $46 tool

Tool is difficult to use we’re not using a vice.

Sean S Verified Purchase

Oil Filter Cutter Krc-1203

Works as advertised for aviation type filters. Has adapter for automotive filters. Needed some threadlocker on cutter wheel nut, it would back off during cutting.

Van C Verified Purchase

Oil Filter Cutter Krc-1203

Works as advertised, includes the accessories required to adapt from female to male threaded filters

Ordered this tool as a backup to our red anodized ACS Can Cutter (currently not available) but were mistaken in thinking that this tool would cut 48110 and 48108 filters but it cannot accommodate a filter of that size (3.7) and doesnt have a relief notch/hole for the male threads of a 48110 filter. This cutter also has only one idler, and we really like the two idlers on the ACS cutter or the Champion FC-2000 cutter.

Perhaps I should have realized this beforehand, but the oil filters I need to cut have male threads on them that prevent the filter from sitting along the bottom of the tool so it can reach the cutting wheel. To cut a filter, as a result, I have to first hacksaw off the male threaded portion, which I have to be careful about to avoid introducing metal particles into the filter, so its not quite as streamlined a process as I expected it would be. Once the filter threads have been cut, the tool works well, but it is really designed for filters with female threads instead.

your service and shipping was excellent but it is not a very good product. Not easy to use because it doesnt have a way to hold the filter in the proper position. It did cut the filter but was not an easy task. When turning the cutter it comes off the filter.