For homebuilts. Used on VariEze and various gyrocopters. Rated to 10 PSI. Not recommended for fuel injected systems. |
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
There are two listed on this page: 1/4" and 3/8". The 1/4" will take any fuel line with 1/4" ID. The 3/8" will take any fuel line with 3/8" ID.
There are two listed on this page: 1/4" and 3/8". The 1/4" will take any fuel line with 1/4" ID. The 3/8" will take any fuel line with 3/8" ID.
There are two listed on this page: 1/4" and 3/8". The 1/4" will take any fuel line with 1/4" ID. The 3/8" will take any fuel line with 3/8" ID.
This is a paper filter and it is not FAA approved. Experimental use only.
Per the manufacturer: 12 microns.
Per the manufacturer: we do not have the fuel flow rate data available for this filter.