VHT SP651 Gloss White Epoxy All Weather Paint is a one step epoxy coating which does not require use of primer. It has been formulated to give the appearance of a baked-on finish. It provides a porcelain-like finish that is chemical, corrosion, rust and salt resistant. Careful preparation is essential to insure proper adhesion. VHT epoxy weather paint is part of a multi high performance coating system. The coating system products consist of paint and clear coat. VHT epoxy weather paint dries to the touch in 30 minutes and completely over night. No special curing is necessary. Application instructions are also printed on each can. |
Matches Cessna 182P white pretty well and goes on easily. It doesnt require a primer but doesnt work well as a primer but as a finish coat for touch-up for small areas it works well.
Vht SP651 Gloss White Epoxy All Weather Paint
Matches Cessna 182P white pretty well and is good for touch-up on small areas. Doesnt require primer but doesnt work well as a primer for polyurethane auto paint.
Vht SP651 Gloss White Epoxy All Weather Paint
Very good product. I replaced the fuel bladders on a Cessna 182P and needed touch-up for the fuel tank covers on top of the wing. This paint did the job and is a pretty close match to the weathered white on the wings.
Vht SP651 Gloss White Epoxy All Weather Paint
good product but the cost of shipping was the same as the cost of the product. Its a shameful thing. Shipping a can of paint is outrageous. Check for other similar products elsewhere, shipping via slow boat is not that expensive.
Vht SP651 Gloss White Epoxy All Weather Paint
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The instructions are included on the can. This product does not require a primer to use.
No this is not recommended to be used with foam.