The TSOfd SunTail (Anti-collision Strobe and white Position) light has been designed for the tail of the aircraft. The SunTail is recommended with the Pulsar NS (Navigation/ Anti-collision Strobe) lights. TSO-C30c Type III and TSO-C96a Class II approved. Available for 14V and 28V electrical systems. |
Note: For Certified / Experimental Aircraft
Designed to use #4 countersunk screws. I had to drill out the holes in the light and grind down the heads of the bolts to fit into the grooves they provide. Light is very bright!
AeroLEDs Suntail White Anti-Collision Strobe / Position Light FAA TSO 24V
Im very happy with it. I have a Piper Warrior 1974 and everything lined up for the screws.
AeroLEDs Suntail White Anti-Collision Strobe / Position Light FAA TSO 12V
An expensive but very high quality product, made in the U.S.
AeroLEDs Suntail White Anti-Collision Strobe / Position Light FAA TSO 12V
Good quality, quick install. Thats what we like. Manufacturers Custom service was really nice and helpful.
AeroLEDs Suntail White Anti-Collision Strobe / Position Light FAA TSO 12V
Modifications needed to the 7ECA Citabrias mount and old wiring in the rudder.
AeroLEDs Suntail White Anti-Collision Strobe / Position Light FAA TSO 12V
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
We are using 22 gauge wire. It will have both shielded and unshielded wire.
Yes this does have a sync wire.
There is not an aircraft specific listing for this light but it does replace most common light assemblies.
This is designed to be mounted in a vertical orientation.