2-Color high brightness light strips
One meter length, just 3/8" wide and 3mm high 120 high-power type 3528 LEDs per meter. 12 or 24 Volt version available. Less than 0.9A current comsumption Dual-colors - 120 LEDs per meter (60 color, 60 Bright White) High power 3528 LEDs provide plenty of lighting in both color and white light 3M tape applied for easy installation Power terminals on both ends (one end pre-wired) permit you to cut and re-use a portion Colors: Blue/White 12 or 24 Volt versions Very bright LED output:
|
Bought one. It didn’t work. Returned it for a second one. It also didn’t work, at its listed 12 volts. Tried it with 24 volts and it worked. Took it back and found the entire 12 volt inventory mislabled. Spruce immediately refunded my money and ordered some 12 volt versions. Yes a bit of a hassle but I can’t complain about they way Aircraft Spruce is handling the situation.
Pilot Flx LED Inst Blu/White 12V
Only 1/2 the lights are working in random order not a good prod
Pilot Flx LED Inst Blu/White 12V
I received these lights the first time and only 30% of the LEDs worked. Aircraft Spruce contacted the supplier who promptly send me a replacement. The second set was even worse. My understanding is that the supplier was pulling and testing its stock as a result. Probably just a fluke with that lot but I dont know. These lights are great but I cant recommend based on the two sets I received.
Pilot Flx LED Inst Blu/White 12V
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, these are not FAA Approved.
Per the supplier: All the customer needs to do is apply voltage to the 3 wires.
Yes, they can be.