Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Flap Tracks For Cessna 152 Series
MFR Model# MC0523231-14
- JUMP TO
- Overview
- Eligibility
- Features
- Reviews
- Q&A
Overview
|
Cessna models 152, A152, F152, FA152 and 172RG aircraft may have various flap track rib assemblies installed. If flap track rib assembly part number 0523231-23 is currently installed, then McFarlane part number MC0523231-14 must be used to replace the flap track. If flap track rib assembly part number 0525001-1, 0525001-1S or 2425001-1 is currently installed, then McFarlane part number MC0525001-2 must be used to replace the flap track.
(Information from eligibility Note 5.)
Flap track rib assembly 0523231-23 includes a 0.16 inch thick flap track with no lightening hole. Flap track rib assemblies 0525001-1, 0525001-1S and 2425001-1 include a 0.25 inch thick flap track with a 2.25 inches lightening hole located between the flap roller slots. The early thinner model flap tracks manufactured by Cessna were varied over three track assembly P/Ns 0523231-13, 0523231-21, and 0523231-23, two of which had 30 deg of travel and one had 40 deg of travel. Cessna has superseded all three P/Ns to the 0523231-13 assembly model (40 deg) for various 150 thru 180 aircraft applications. McFarlane has followed Cessna's lead on this, as having extra flap travel will not effect those aircraft with only 30 deg of travel. Your flap rollers, regardless of having 30 deg or 40 deg of travel, should never bottom out in the flap slot as the rigging and/or bell cranks should limit the movement prior to contact of the two parts. If you have a 30 deg track the installation instructions on the ICA are still applicable, you will place a pin in either end of your 30 deg track and align it with the forward end of the new McFarlane slots and the aft end pin will be in the middle of the flap track. You will then transfer the rivet holes and complete the installation instructions. Flap Tracks for Cessna Aircraft Replace worn-out tracks to prevent dangerous and expensive binding problems! McFarlane's FAA-PMA flap tracks feature many improvements over the original. |
Eligibility
MC0523231-14Features
- Improved material
- 20% stronger
- 6 times fatigue strength
- Greater resistance to wear, "mushrooming" and stress cracking
- Precision machined for smooth rolling action
- No pre-drilled holes for a precise, clean installation
- Replace just the track, not the entire assembly
- Cessna only lists the rib assembly for most aircraft
- Eliminates the need to drill into the fuel tank area
- Alodined then epoxy primed per MIL-PRF-23377 for corrosion protection
- Cessna aircraft models 150 thru 210
Reviews
Worked as it should
Verified Purchase
McFarlane MC0523231-14 Flap Track
Comparing the purchase with other suppliers, this has been the best move. Thank You AS
Verified Purchase
McFarlane MC0523231-14 Flap Track
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.