SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

Ultralight & Experimental Tube #7141 13X6.50-6 TR13

$18.99/Each
Part# 06-01590
MFR Model# 7141
DescriptionValve StemPart Number
Azusa Tube # 7141 13X6.50-6Straight06-01590

Overview

Inner Tubes for most Azusa variety tires

Reviews

These are a true 90 degree valve stem with the valve stem being very near the center of the tube. These tubes work very well for the Azusa 2 piece experimental wheels. The Azusa 2 piece wheel is a split wheel with the with valve stem placement in the middle of the wheel. Meaning that each half of the wheels has a 180 degree cutout for the tube valve stem. A true 90 degree valve stem is required for this application. The rubber thickness is near heavy duty on these tubes as well. Be careful as some tubes that claim they have a 90 degree stem are actually 45 degrees and the stem is offset further tpo the side of the tube.

Mike A
September 5, 2019

Tube is of good quality, good 90 degree bend but valve is not on center. I also had to modify rim to make them work.

Roger S
February 6, 2021

Another reviewer said These are a true 90 degree valve stem with the valve stem being very near the center of the tube. I ordered the Azusa tube #7125, and the 90 degree valve stem was NOT even close to the center of the tube. It was about 25% of the way around the tube. I ended up modifying my wheels and moving the valve stem hole to better accommodate the offset valve stem. If I ever do end up with a proper tube, it will still fit the wheels!

Donald G
August 5, 2020

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is tube #7116 a 90 degree bent stem?

Yes, tube 7116 is equipped with a 90 degree bent valve stem.

Q: Are 06-00075 and/or 06-01590 90&#-1120;bent metal stem tubes?

06-00075 is a 90* stem. 06-01590 has a straight stem.

Q: Does the AZUSA TUBE #7121 have a bent 90 degree stem?

No, the tube 7121 has a straight valve stem.

Q: Does tube # 7138 (ULTRALIGHT & EXPERIMENTAL TUBE #7138 800 X 6) have straight valve stem?

No, this tube has a 90 degree valve stem.

Q: How long is the stem of 06-00773? Please specify where you measure it from. My current stem is 39 mm from the outside edge of the bent or 32 mm from the inside edge of the bent.

From the 90 degree bend to the cap, the stem is approx 1-7/16 inches.

Q: Can nitrogen be used in these tubes?

We have no data supporting this tubes being used for nitrogen.

View in Catalog

View Image View in Catalog