A blend of solvents used for viscosity and drying control of Poly-Brush, Poly-Spray and Poly-Tone. Blend #R-65-75 is recommended as the standard reducer in normal weather, 65°75°F. #RR-8500 is a retarder-reducer with slower drying time. Recommended for temp above 85° & warm humid weather. Important Notice: All mixed paints are special order and are non-returnable. |
Poly-Fiber products for repairing some access panel holes that have worn out. This system is easy, fast and dependable. I have Poly-Fiber paint from 20 years ago that is still good. Cant go wrong with it.
Poly-Fiber R65-75 Reducer Quart
packaged in a non waist full size. I didnt need much and this was just right.
Poly-Fiber R65-75 Reducer Quart
Haven’t used anything yet but fast shipping
Poly-Fiber R65-75 Reducer Quart
Poly-Fiber R65-75 Reducer Quart
THE REDUCER WORKS GREAT WITH THE PAINT. THANK YOU
Poly-Fiber R65-75 Reducer Quart
Aircraft Spruce, you responded again, and very quickly I might add. Much appreciated. Thanks for being there when we need you the most. Even little things like this, that will hold up a project if not responded to quickly, are taken care of routinely by you folks!! That is why we will continue to use Aircraft Spruce!!
Pure and stable reducer, any product that stands up to my personal saying SAY WHAT YOU DO AND DO WHAT YOU SAY Has my vote.
I use this for RC Airplanes. It works perfectly, along with poly brush, on the fabric covering.
arrived on time, and in good shape
works fine
Poly-Fiber R65-75 Reducer Quart
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
You would use a 3:1 Mix Ratio. 3 Poly Tone, 1 R65-75 Reducer.