A pink translucent, 1 part air drying resin used for the first 2 or 3 coats to penetrate and seal the fabric weave and assure good adhesion. Also used to attach the finishing tapes and reinforcing patches. Brush on initial coat thinned 3:1 with reducer. Subsequent coats are thinned 3:1 with reducer and applied with a spray gun to avoid brush marks & cut application time. Available in tinted or untinted and in quart, gallon, or 5 gallon sized. Important Notice: All mixed paints are special order and are non-returnable. |
POLY FIBER POLY-BRUSH TINTED GALLON
Excellent product
POLY FIBER POLY-BRUSH TINTED GALLON
POLY FIBER POLY-BRUSH TINTED GALLON
Great stuff
POLY FIBER POLY-BRUSH TINTED GALLON
Great stuff!!
POLY FIBER POLY-BRUSH TINTED GALLON
POLY FIBER POLY-BRUSH TINTED GALLON
POLY FIBER POLY-BRUSH TINTED GALLON
Works well
POLY FIBER POLY-BRUSH TINTED GALLON
good stuff
Good product. Tried and true.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Only available in clear or tinted. The tinted is only sold in a pinkish color.
Each of these products have a 4 year shelf life in closed containers.
Poly Brush is thinned 3 parts Poly Brush to one part reducer. There are two reducers available. R65-75 for applying it in lower temps, and RR8500 for applying it in higher temp environments. MEK can be used for cleaning surfaces and spray equipment.
Poly-spray is intended for use on fabric. I don't believe it will adhere to metals.
This is designed to be applied directly to fabric. We do not have any data supporting it's use with epoxied wood.
The Poly-Brush states that it will cover approximately 150 sq feet per gallon.