SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

Poly Fiber Poly-Tone Finish

Quantity
Add to Wishlist

Overview

A durable semi-gloss, 1-part, air drying flexible paint available in over 50 popular aircraft colors. Recommended as the standard finish for the Poly-Fiber cover process. Also may be used over suitably primed metal components of fabric covered aircraft. Fabric damage is more easily repaired when Poly-Tone finish is used. All pigments are non-bleeding or fading. Will not oxidize with age. Poly-Tone is always thinned 4 to 1with Poly Fiber Reducer (65-75 or 8500).
Note: All mixed paints are special order and are non-returnable.

Documents

  • Accessories
  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Good product but watch your part numbers very closely .

Macpat R Verified Purchase

Poly-Tone 105 Insignia White Gallon

October 5, 2024

I got the paint OK, it works OK..... but there is no color match with my yellow cub. Just gave up and left the off-color repair alone.

Bert B Verified Purchase

Poly-Tone 143 Cub Yellow Quart

September 20, 2024

Hangar 7 Verified Purchase

Poly-Tone 105 Insignia White Quart

August 13, 2024

John C Verified Purchase

Poly-Tone 105 Insignia White Quart

July 6, 2024

John P Verified Purchase

Poly-Tone Cuby S/T Green 157

June 4, 2024

Stitts process has always been my first choice

Michael L Verified Purchase

Poly-Tone 220M Nevada Silver

May 4, 2024

On time - sealed.

Ajaypal M Verified Purchase

Poly-Tone 105 Insignia White Quart

April 3, 2024

good

Barnstormers W Verified Purchase

Poly-Tone 151 Evrglds Green Gl

March 14, 2024

Perfect as always….

Bob D Verified Purchase

125 Poly-Tone Tucson Gream Quart

January 11, 2024

Quick service and all good

Paul C Verified Purchase

Poly-Tone 105 Insignia White Quart

November 29, 2023

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Regarding Poly-Tone paint: If a custom color is desired, can it be mixed to match a color sample?

We can only provide Poly-Tone paint colors that are on the Poly-Fiber color chart. If you wish you need a custom color matched from a sample, you will need to go directly through Poly-Fiber. There website can be found at:

http://www.polyfiber.com/

Q: Is this Poly-Tone considered aerothane?

No. Poly-Tone is a vinyl based paint while aerothane is a polyurethane based paint. An example part number for Poly-Fiber aerothane paint would be 105-AQ-K.

Q: Will Poly-Tone adhere properly to etching primers such as zinc chromate and zinc phosphate?

No, Poly-Tone is designed to be used over Poly-Spray, which is a vinyl base material. Etching primers are used on metals, which a polyurethane top coat, like Aerothane is used.

Q: Is there a clear coat that can be applied to the Polytone paints?

Clear Poly-Tone is not available.

Q: Can Poly-Tone be used on Fibre Glass?

Poly Tone is a vinyl base paint designed to be used with other Poly Fiber fabric covering materials. It we not designed to be used on fiberglass parts. The two-part Aerothane or Mark II products are used for metal and fiberglass parts.

Q: What is the drying time for poly-tone?

Dust free in 20 minutes. Allow 12 hours drying before using masking tape.All drying times are given at 70 degrees F and 50% humidity.

Q: Can poly tone be sprayed over a ceconite surface prepped with 3 coats nitrate dope?

No, Poly Tone and Nitrate Dope are not compatible materials.

Q: Can poly fiber poly tone finish 105 insignia white be brush applied?

Poly Fiber only recommends spray application.

Q: What epoxy primer does polyfiber recomend for fusalage prior to fabric covering?

Stits epoxy-varnish EV-400 for wood
Stits epoxy primer(green/white) EP-420/430

Q: Can poly tone be applied directly over poly fiber epoxy primer EP-420?

Yes that is correct.

View in Catalog

View Image View in Catalog