Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Right Handino Fuel Sealer 9700A/B Frc 1Gallon Kit
MFR Model# 543220
- JUMP TO
- Overview
- Documents
- Reviews
- Q&A
- View in Catalog
Overview
| Rhino 9700 is a 100% solids epoxy system which is the highest quality fuel and chemical resistant lining and coating material available. It contains no solvents and no corrosive or carcinogenic substances to assure low toxicity and ease of application. Provides superior low temperature curing, impact and abrasion resistance, and cures in the presence of moisture or humidity. Brushes on easily. Sold in 3 gallon kit containing 2 gallons of resin and 1 gallon of hardener. One 3 gallon kit can coat tanks of average size homebuilt. Used extensively on Lancairs and other homebuilts. Shelf life one year. |
Reviews
I have been using this Tank Sealant for over 20 years on dozens of Experimental Aircraft. It has never given me any issues on any of the aircraft it was used on to seal up the composite fuel bays. Great stuff!
I used this product for an unrelated use. Sealing a 150 gallon coolant tank on a CNC mill. After 20 years of use, the tank was riddled with small holes from corrosion. After cleaning, sand blasting, and patching the holes, we applied two coats of this sealer and very pleased with the results. I dont expect to ever have a problem with this tank again.
Ecellent delivery time. Great product.
I have used this product in 3 costume made gastank... Works very well... Very good product. I recommend it.
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the manufacturer: Yes, this material is pourable and can be sloshed to get the thickness of approximately 20 mils. These are the design parameters for the material.
Yes. We have added the "Tech Data and Instructions" PDF to the documents tab of this web page. Please review them there.
Per supplier: Yes, this will work just fine.
This product is gray and dries glossy. Similar to a gray epoxy floor in a garage. It is not clear.
The C of C is the manufacturer's certificate of conformance which is the paperwork showing traceability and the sign off that the material was made to the specification. It is not required on this tank sealer, although some business customers prefer to have the traceability paperwork on all parts.
At 77 degrees pot time is 25-30 minutes, and full cure is 7 days.
Per the instructions, "the surface must be free of contaminants such as dust, oil or dirt."
No, this is not considered DG.
There is no mention of thinning on the data sheet.
