This quality line of engine gauges will provide an affordable engine monitoring package for experimental aircraft. Hundreds of these gauges are flying today in various homebuilts worldwide. Used extensively in Vans RV line of aircraft. NOTE: Our gauges do not include our company name or logo on the face. • 270° Sweep Electric Gauges. • High Quality Movements in Injection Molded Cases. • Standard Aircraft 2-1/4" Hole and Mounting Pattern. • Internally Lit (12V only). • Electric Design Uses Tranducers and Senders No pressurized Fuel and Oil in the Cabin. • Wires Attach with Nuts (Included) to 6-32 Studs on Instrument. No Spade Fittings. • Cases have Brass Inserts for the #6 Mounting Screws. No Need for Instrument "Grasshopper" nuts. • Clear and Sharp Lettering with the Appropriate Operating Arcs and Redlines Screened Directly on the Face. • Works with Standard Stewart Warner Match Transducers. |
This worked perfect, easy to install. I put a DVM on it and slowly moved the sender through full motion. No dead spots, very linear. I am excited to have a accurate fuel level again and at a great price!
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: The 385C-F has what is referred to as a right hand swing to the float arm. If you hold the sender, mounting plate up, with the two holes that are closer together pointing towards your belly. The swing arm will swing to your right side. Do the same with part #385B-F and the swing arm will swing to your left. I hope this helps.
No, these items are not interchangeable.
We have added a drawing to the documents tab for part 10-01502. Please review this file for specific compatibility.
Dynon recommends using Dynon probed with the Skyview system.
It is referring to the size available. It can be used as a 6 inch or 12 inch depending on your tank.
This is just the float only.
No, this is designed to be mounted to the top of the tank.