Clocks are constructed for easy installation in a wide variety of replacement applications for home builts. The rugged quartz movement is accurate within 2 sec. in 24 hrs under normal operations and runs accurately in temps from -30º to 180ºF. |
Clock looks great not sure I like the push on connector very difficult to remove when we needed to move tbe clock to another location. Thanks
CA-7264 Quartz A/C Clock 12V
Works as expected, installed it in my PA28-151 warrior
CA-7264 Quartz A/C Clock 12V
Excellent clock, however I recently learned that it should be wired via the master switch unless you fly weekly, as I used to. Otherwise at 12.8 mA my Gill 24V battery (14Ah rated) will loose enough charge over 2 weeks to make starting my O235 difficult.
Great little clock - my old one went for 40 years.
CA-7264 Quartz A/C Clock 12V
Nice replacement for a wornout mechanical clock. Looks well with older style guages
CA-7264 Quartz A/C Clock 12V
Perfect replacement for my Cessna 172M. Very east to install. Fits perfect
CA-7264 Quartz A/C Clock 12V
Needs to have teflon coated wiring for airplanes.
Delivered promptly and working well.
clock is in and works fine I wonder with future up grades should I installed it.
Mine has been running since October 2017. I reset for daylight- standard time, otherwise it stays within a minute.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This clock fits in a 2-1/4" hole and has a depth of 2 inches not including wiring.
The clock weights about 4 ounces.
Per the supplier: 10-11 Milliamps.
No, it is not lit and is made by Instrument Services Inc.
Per the manual, "This clock is to be used as a time indicating clock only. It is not to be used as a flight instrument and or warning instrument."
Yes, the wiring is included in the box.
Per the supplier: 10-11 Milliamps is the current draw on this unit.
Yes, there will need to be a cutout to allow the stem through the panel.
1 year warranty from date of mfg. Minimum exceptions apply.