Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
JPI EDM 700 Fuel Flow Transducer 231 (Gravity)
MFR Model# 700900-2
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
The Fuel Flow Transducer measures flows of hydrocarbon fuels such as gasoline, kerosene, and #2 diesel fuel and other light transmitting, non-corrosive liquids of similar viscosity. Typical fuel flow applications include aircraft fuel monitoring systems; gasoline, diesel, and gas turbine engine test stands; and industrial furnaces.
The transducers give repeatable signals on gasoline across a 100 to 1 flow range down to 0.3 GPH. The higher viscosity of diesel fuel reduces signal repeatability at flow rates below 2 GPH. Pressure drops are very low compared to other turbine flow transducers. The transducer bearing system is rated for continuous operation at the upper end of the flow range. The transducers produce a current pulse signal from an opto-electronic pickup with a preamplifier. Electrical Specifications: 12 to 15 VDC between RED (+) wire and BLACK (-) wire. 30 to 50 mA at 12 VDC. Signal Specifications: Open collector transistor output on WHITE wire. Sensor will pull-down to 1.0 volt with 10-15k ohm pull-up resistor installed.
|
Reviews
Came with everything I needed to install. Works great.
Verified Purchase
J.P. Instruments EDM Gravity Fuel Flow Transducer 231 TSO
This one is the second one I buy Durability one year !
Verified Purchase
J.P. Instruments EDM Gravity Fuel Flow Transducer 231 TSO
Good technology, admittedly it is a replacement after 5 years of service. My conversations with JPI have been informative and supportive over the years. I’d recommend the EDM 700.
Received it a day earlier than expected
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, a fire sleeve is included with the JPI EDM 700 (10-27094).
The JPI EDM 700 (10-27094) is compatible with the FS 450 (10-00134) however do not connect the red wire from the FS 450 to the EDM 700.
Yes, this is compatible with the EDM 730.
We do not have any data showing this will work in marine applications.
No, for fuel injected engines, use Part# 10-27089.
You will also have to purchase the harness.
K factor is on the transducer in permanent marker. The pilots guide explains how to adjust. Injected starts 29.00 and gravity 19.00.
No, This will not work with a Hoskins unit.
Yes, this is the correct part.
